Question
I have read the FAQs, and I'd like to set the IPMI to dedicated, I ran this command:

# ipmitool raw 0x30 0x70 0x0c 0 0
Unable to send RAW command (channel=0x0 netfn=0x30 lun=0x0 cmd=0x70
rsp=0xc7): Request data length invalid

No luck, any ideas?
Answer
On the X9 motherboard, the command was shortened to:

Ipmitool raw 0x30 0x70 0x0c 0 //get lan mode; and
Ipmitool raw 0x30 0x70 0x0c 1 0/1/2 //set to dedicated/share/failover mode
Was this FAQ helpful?
YES      NO

Enter Comments Below:
Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.



Enter your email address below if you'd like a technical support staff to reply:



Please type what you see:


FAQ Stats
FAQ ID Related Category / Keyword Date Posted Code
14417 Hardware Monitoring:
- IPMI
06/21/12


    Print Answer