Question I am using two AOC-SAT2-MV8 cards in the 133 Mhz PCI-X slots on your X7SBE-0 motherboard. The Device Manager says that both cards are working properly, but they will not recognize the hard disks that I connect to them. (Seagate 1.5TB ST31500341AS) The cards will however recognize a WD6400AAKS 640gb drive. The MV8 driver version I have is 3.6.3.3, is there an update to this driver or the card's firmware that will allow the MV8 to recognize the 1.5TB Seagate drives? Answer The AOC-SAT2-MV8 card does not support 1.5TB hard drive and there is no firmware update available. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.  Enter your email address below if you'd like technical support staff to reply:  Please type the Captcha (no space) M U F M FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 8369 Peripherals: - AOC Storage: - Add on SATA controller 12/12/08 DL     Print Answer