 |
 |
MBD-H8DAR-T-O |
- H8DAR-T (Standard Retail Pack)
|
MBD-H8DAR-T-B |
|
|
 |
Form Factor |
|
Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
|
 |
CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron 200 Series processor(s)
- VRM x4
|
Chipset |
- AMD 8132 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
|
 |
Memory Capacity |
- Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
 |
SATA |
- Adaptec AIC-8130: (Marvell 88SX6041) 4-port Hercules-2, rev B2, SATA Controller
- 4-Port SATA
- Host RAID 0, 1, JBOD
|
Zero Channel RAID |
- Support for Zero-Channel RAID
- (Card not included)
|
IPMI |
|
Network Controllers |
- Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
VGA |
- ATI Rage XL 8MB PCI Graphics Controller
|
|
 |
PCI-X |
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
|
IPMI |
|
|
 |
 |
 |
1U Chassis |
|
Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
|
|
 |
Serial ATA |
- Four Serial ATA connectors
- Four SATA hard drives supported
|
IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
LAN |
|
USB |
- FUCI
- Up to 5 USB Ports 1.1 Compliant
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 2 Fast UART 16550 serial ports
|
|
 |
BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- PCI 2.2
- Fan Speed Control
|
|
 |
Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
Doctor III
- Watch Dog
|
Power Configurations |
- ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
 |
CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V & battery voltage
- Up to 5 fan status
- Supports System Management Utility
|
FAN |
- Total up to 5-fan status
- 3-pin fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
|
LED |
|
Other Features |
|
|
 |
FCC |
- Passed to meet FCC standard requirement
|
|