 |
|
 |
| MBD-H8DMR-i2-O |
- H8DMR-i2 (Standard Retail Pack)
|
| MBD-H8DMR-i2-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
| CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
|
| |
- Two Hyper-Transport links between the CPUs
|
| Chipset |
- nVidia MCP55 Pro
- NEC uPD720400
|
| |
|
|
| Memory Capacity |
- 8x 240-pin DIMM sockets support up to
64GB DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI |
|
| Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
|
| Super I/O |
|
| VGA |
- ATI ES1000 Graphics Controller
16MB Graphics & VGA port
|
| |
|
|
| Serial ATA |
- Six SATA2 Ports
- Six SATA2 hard drives supported
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy |
|
| LAN |
|
| USB |
- FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- Two Rear Ports
- Two Internal Headers
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- One Fast UART 16550 serial port
- One header
|
|
|
|
|
|
| Important Chassis Notes |
- To ensure system stability, a 560W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
|
| |
|
|
|
| Model(s) |
|
| |
|
|
| Universal PCI-e / PCI-X |
- Two Universal PCI-e / PCI-X Slots
|
| Slot 1 |
- One PCI-express x8 Slot OR
- One 64-bit 133MHz PCI-X slot
|
| Slot 1 |
- One PCI-express x8 Slot OR
- One 64-bit 100MHz PCI-X slot
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
|
| |
|
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT, Chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 5-fan status tachometer monitoring
- Up to five 3-pin fan headers
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans w/ fan-speed control
- Low noise fan speed control
- Overheat backup fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
Doctor III