| | MBD-H8SGL-F | - H8SGL-F (Standard Retail Pack)
| | | Form Factor | | Dimensions | - 12" x 8" (30.5cm x 20.3cm)
| | | CPU | - Single 1944-pin Socket G34
- Supports one 16/12/8/4-Core ready AMD Opteron 6000 Series processors
- HT3.0 Link support
| Chipset | - AMD chipset SR5650 + SP5100
| | | Memory Capacity | - Eight DIMM sockets
- Supports up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
- Quad channel memory bus
- See Detailed Memory Support Matrix
| Memory Type | - DDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | SATA | - AMD SP5100 (RAID 0, 1, 10)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| Network Controllers | - Two Intel® 82574L controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
| VGA | | Super I/O | | | | SATA | | LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
| USB | - 8x USB 2.0 ports
- 2x Rear, 2x header(4x ports), and 2x TypeA
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
| Others | - 1 SATA DOM power connector, TPM header
| | | PCI-E/PCI | - 1 PCI-E 2.0 x8 (in x16 slot)
- 1 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 3 PCI
| | | | | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
| | | Software | | Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
| | | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| FAN | - Up to 6-fan status tachometer monitoring
- Up to six 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 6x Fan connectors
- I2C Temperature Sensing Logic
| LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | RoHS | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | FCC | - Passed to meet FCC standard requirement
| |