A+ Server 1020A-T / 1020A-TB
  A+ Products  Systems   1U   [ 1020A-T / 1020A-TB ]








Integrated Board
Super H8DAR-T


Key Features

1. Dual AMD® Opteron™ Support,

    (Dual Core Ready)

    1000 MHz HyperTransport Link
2. Up to 16GB DDR 400 SDRAM (or)

    Up to 16GB DDR 333 SDRAM (or)

    Up to 32GB DDR 266 SDRAM
3. 2 x 64-bit 133/100MHz PCI-X Slots

    (1x Full-height/Half-length,

    1x Low-profile/Half-length)
4. 1 x Broadcom® 5704 Dual Port Gigabit

    Ethernet Controller
5. Zero Channel RAID Support
6. 4 x 3.5" SATA Hot-swap Drive Bays
7. 500W Cold-swap Power Supply
8. IPMI 2.0 Support + 3rd LAN Support


Available Colors: Black     Beige    


 Drivers & Utilities       Tested Memory List       BIOS       Manuals



Product SKUs
AS-1020A-T
  • A+ Server 1020A-T (Beige)
AS-1020A-TB
  • A+ Server 1020A-TB (Black)
 
Motherboard


H8DAR-T
 
Processor/Chipset
CPU
  • Dual 940-pin ZIF Sockets
  • Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
  • VRM x4
Chipset
  • HyperTransport Link
  • AMD 8132 HyperTransport PCI-X Tunnel
  • AMD 8111 HyperTransport I/O Hub
 
System Memory
Memory Capacity
  • Eight 184-pin DIMM sockets
  • Supports up to 16 GB DDR 400 MHz memory or
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 32 GB DDR 266 MHz memory
  • Single or Dual(recommended) channel memory
  • For Single CPU: Memory must be populated in the adjacent memory bank
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • Marvell 88SX6041 Controller
  • 4-Port SATA
  • Host RAID 0, 1, JBOD
Zero Channel RAID
  • Support for Zero-Channel RAID
  • (Card not included)
IPMI
Network Controllers
  • Broadcom® 5704 Dual Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
 
Expansion Slots
PCI-X
  • 2x 64-bit 133/100MHz PCI-X (3.3V) slots
  • (One slot for Full-height / Half-length cards, one slot for Low-profile / Half-length cards)
 
Input / Output
Serial ATA
  • Four Serial ATA connectors
  • Four SATA hard drives supported
IDE
  • Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
Floppy
  • 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 2 RJ45 LAN port
USB
  • FUCI
  • Up to 5 USB Ports 1.1 Compliant
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
 
System BIOS
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 36 lbs (16.4kg)
Available Colors
  • Beige, Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • N/A
 
Drive Bays
Hotswap
  • 4 x 3.5" hot-swap SATA Drive Bays with SAF-TE
 
Peripheral Drives
Floppy
  • TEAC 3.5" 1.44MB Slim Floppy Drive
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
Backplane
4 x 3.5" SATA HDD Backplane
 
System Cooling
Fans
  • 4x 9cm 10,200 RPM cooling fans
 
Power Supply
Cold-swappable 500W AC power supply module with PFC
AC Voltage
  • 100 - 240V, 60-50Hz, 10 Amp Max
DC Output
  • 5V + 3.3V ≤ 160W
+5V
  • 30.0 Amp
+5V standby
  • 2.0 Amp
+12Vall
  • 39.0 Amp Max
-12V
  • 1.0 Amp
+3.3V
  • 21.0 Amp
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI/API Power Management
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V & battery voltage
  • Up to 5 fan status
  • Supports System Management Utility
FAN
  • Total up to 5-fan status
  • 3-pin fan speed control
Temperature
  • Monitoring for CPU, chassis, environment
LED
  • Overheat LED
Other Features
  • Chassis Intrusion Header
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8DAR-T

CSE-813T+-500(B)
1

1
Super H8DAR-T Motherboard

1U SC813T+-500 Chassis (B = Black)
Air Shroud CSE-PT70 1 Internal Air Shroud
Cable(s) CBL-0061L 4 SATA Cables
Fan(s) FAN-0083 4 Cooling Fan
Heatsink Components BKT-0004

BKT-0005
2

2
Heatsink Mounting Plate

Heatsink Retention
Mounting Rails CSE-PT51 1 1U Mounting Rail Kit
Peripheral Drives FPD-TEAC-S (B)

CDM-TEAC-24(B)
1

1
TEAC 3.5" 1.44MB Slim Floppy Drive (B = Black)

Slim 24x TEAC CD-ROM Drive (B = Black)
Power PWS-0048

CSE-PT813-PD520
1

1
SP502-1S Cold-Swappable 500W 1U power supply

Power Distributor
Riser Card CSE-RR1U-X

CSE-RR1U-XLP
1

1
1U 1-Slot 64-bit 3.3V PCI-X - Left Side

1U 1-Slot 64-bit 3.3V PCI-X Low Profile - Right Side
SATA CSE-PT39(B)

CSE-SATA-813
4

1
1" SATA Hard Drive Trays

1U SATA Backplane
Optional Parts List
  Part Number Qty Description
Heatsink / Retention SNK-P0012 - Please refer to our Thermal Components Matrix
IPMI AOC-1UIPMI-B

AOC-1UIPMI-LANG
-

-
1U IPMI 2.0 Riser Card

Supermicro IPMI Gigabit LAN Card (for 3rd LAN)


**4GB memory modules not fully tested due to limited availability
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Page Viewed: