 |
|
 |
| MBD-H8DAE-O |
- H8DAE (Standard Retail Pack)
|
| MBD-H8DAE-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
| CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipset |
- AMD 8131 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
| |
|
|
| Memory Capacity |
- Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU I DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| IPMI |
- 1U and 3U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 2U and 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI-LANG)
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers |
- Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
|
| |
|
|
| PCI-X |
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 66MHz PCI-X (3.3V) slots
|
| PCI |
- 2 32-bit 33MHz PCI (5V) slots
|
| IPMI |
|
|
|
|
|
|
| 2U Chassis |
* Please use air-shroud CSE-PT0083
(Air-shrouds sold separately)
|
| Rackmount Tower / 4U |
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[ 8-pin (+12V) and 24-pin are required]
|
| |
|
|
| BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
|
| |
|
|
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- FUCI
- Up to 5 USB Ports 1.1 Compliant
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
|
| Power Configurations |
- ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
- Up to 8 fan status
- Supports System Management Utility
|
| FAN |
- Total up to 8-fan status
- 3-pin fan speed control or
- 4-pin Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
|
| LED |
|
| Other Features |
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
