Supermicro KMS Server Configuration Menu
Note: Be sure to configure all the features in the submenu of Supermicro KMS Server Configuration and the feature of "KMS Security Policy" in the submenu of Super-Guardians Configuration so that your system can communicate with the KMS server.
Supermicro KMS Server IP address
Use this feature to set the Supermicro Key Management Service (KMS) server IPv4 address in dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to set the second Supermicro KMS server IPv4 address in dotted-decimal notation.
Supermicro KMS TCP Port number
Use this feature to set the TCP port number used in Supermicro KMS Server. The valid range is 100–9999. The default setting is 5696. Do not change the default setting unless a different TCP port number has been specified and used in the Supermicro KMS Server.
KMS Time Out
Use this feature to enter the KMS server connecting time-out (in seconds). The default setting is 5 (seconds).
TimeZone
Use this feature to set the correct time zone. The default setting is 0 (not specified).
Client UserName
Press <Enter> to set the client identity (UserName). The username can be between 0 and 63 characters in length.
Client Password
Press <Enter> to set the client identity (Password). The password can be between 0 and 31 characters in length.
This setting provides options for managing the Certificate Authority (CA) certificate.The options are Update, Delete, and Export.
This setting provides options for managing the client certificate.The options are Update, Delete, and Export.
Use the three features to enroll factory defaults or load the KMS Transport Layer Security (TLS) certificates, which are generated by the KMS Server, from the file stored in the USB flash drive as shown below.
Private Key Password (Available when "Client Private Key" above has been set)
Use this feature to change the password for the client private key.