BIOS Error POST (Beep) Codes
During the Power-On Self-Test (POST) routines, which are performed each time the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the boot up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot up process. If a fatal error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps that can be heard on an external buzzer connected to JD1. The table shown below lists some common errors and their corresponding beep codes encountered by users.
|
BIOS Beep (POST) Codes |
||
|---|---|---|
|
Beep Code |
Error Message |
Description |
|
1 beep |
Refresh |
Circuits have been reset (Ready to power up) |
|
5 short, 1 long |
Memory error |
No memory detected in system |
|
5 short, 2 long |
Display memory read/write error |
Video adapter missing or with faulty memory |
|
1 long continuous |
System OH |
System overheat condition |