SuperServer 2029BT-HER (Complete System Only)

Products Systems BigTwin [ 2029BT-HER ]





Integrated Board
Super X11DPT-BR
Coming Soon

Key Features
- Hyperscale / Hyperconverged
- Compute Intensive Application
- Enterprise Server, High Density
Hot Storage

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual Socket P (LGA 3647) support
2nd Gen. Intel® Xeon® Scalable
processors (Cascade Lake/Skylake)
2. 24 DIMMs; up to 6TB 3DS ECC
DDR4-2933MHz RDIMM/LRDIMM,
Supports Intel® Optane™ DCPMM††
3. 2 PCI-E 3.0 (x16) Low-profile slots,
1 SIOM card support
Note: must bundle with Network card
4. 10 EDSFF (E1.S) drive bays and
2 SATA M.2 drive bays per node
5. IPMI 2.0 + KVM with dedicated LAN
6. Video via Aspeed AST2500 BMC
7. 4 Heavy duty 8cm PWM fans with
air shroud
8. 2600W Redundant Power Supplies
Titanium Level (96%)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (with minimum 2 CPUs, 4 DIMMs, and 10 E1.S drives).


Product SKUs
SYS-2029BT-HER
  • SuperServer 2029BT-HER (Black)
Motherboard

Super X11DPT-BR
Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    Dual UPI up to 10.4GT/s
  • Support CPU TDP up to 165W
Cores
  • Up to 28 Cores
Note BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
System Memory
Memory Capacity
  • 24 DIMM slots
  • Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM††
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C621 chipset
Network
  • Must bundle with at least one SIOM network card
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • ASPEED AST2500 BMC
Input / Output (per Node)
LAN
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
Video
  • 1 VGA port
DOM
  • 1 SuperDOM (Disk on Module) port
Others
  • M.2 and SATA DOM for boot drive only
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
Power Configurations
  • ACPI / APM Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-217BEQ+-R2K60P
Dimensions and Weight
Width
  • 17.6" (447mm)
Height
  • 3.47" (88mm)
Depth
  • 28.75" (730mm)
Package
  • 24.65" (H) x 9.76" (W) x 45.28" (D)
Weight
  • Gross Weight: 85 lbs (38.6kg)
  • Net Weight: 54.5 lbs (24.7 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express
  • 2 PCI-E 3.0 (x16) Low-profile slots
  • 1 SIOM card support
    (must bundle with network card)
Drive Bays / Storage (per Node)
E1.S
  • 10 E1.S devices (per Node)
M.2
  • 2 SATA M.2 (per Node)
System Cooling
Fans
  • 4 Heavy duty 8cm PWM fans with air shroud
AC/DC240V Input Redundant Power Supply
2600W Redundant Power Supplies with PMBus
Total Output Power
  • 2600W: 208 – 240Vac
  • 2600W: 220 – 240Vdc (for CQC only)
Dimension
(W x H x L)
  • 45 x 40 x 480 mm
Input
  • 208-240Vac/15-12.5A / 50-60Hz
  • 220-240Vdc/13.5-12.5A (CQC only)
+12V
  • Max: 216.6A / Min: 0A
12Vsb
  • Max: 4.5A / Min: 0A
Output Type
  • Gold Finger (4HP+2LP-20S output connector)
Certification Titanium Level96% Titanium Level
[ Cert. in progress ]
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)

See Parts List

Parts List - (Items Included)

Part Number
Qty
Description
Motherboard / Chassis MBD-X11DPT-BR
CSE-217BEQ+-R2K60P
4
1
Super X11DPT-BR Motherboard
2U Chassis
Add-on Card / Module BPN-ADP-10NVME2S-1UB 4 High Density 2U BigTwin NVMe backplane adapt,HF,RoHS
Backplane BPN-EDS4-217BEQ-S2 1 2U 4-Node Backplane Supports up to 10xE1.S and 2xM.2 SATA3 Storage Medias per Node
Cable 1 CBL-PWCD-0376-IS 2 PWCD,US,IEC60320 C19 TO C20,940mm (3ft),14AWG,15A,250V,Black
Cable 2 CBL-SAST-1049 4 SLIMLINE SAS (LE) to SLIMLINE SAS, INT, 35CM,32AWG,85 OHM
Drive Tray(s) MCP-220-12105-0N 40 SC121EF EDSFF cage
Drive Tray(s) MCP-220-12106-0N 8 SC121EF M.2 cage kit with M.2 adapter
Air Shroud MCP-310-21720-0B 4 Bigtwin plastic air shroud for X11DPT-BH (4CM fan chassis)
Riser Card RSC-P-6 4 RSC-P-6 (1U LHS TwinPro RSC with 1 PCI-Ex16),RoHS
Riser Card RSC-R1UTP-E16R 4 1U RHS TwinPro Riser card with one PCI-E x16 slot
Heatsink / Retention SNK-P0067PSMB 4 1U Passive High Performance Front CPU Heat Sink w/ an 18-mm Wide Middle Air Channel for X11 Purley Platform Equipped w/ a Narrow Retention Mechanism/Bolster
Heatsink / Retention SNK-P0071VS 4 1U Proprietary Passive CPU Heat Sink (124 mm Long) for SYS-2029BZ-HNR Series Servers (X11 2U4N 3UPI Big Twin)
* Power Supply PWS-2K60A-1R 2 1U 2600W Redundant Titanium PWS, 45(W) X 40(H) X 480(L)
Notes:
  1. Parts with * are inside the chassis
  2. Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.


Optional Parts List
Part Number Qty Description
Global Services & Support OS4HR3/2/1
OSNBD3/2/1
-
-
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)
Network Card(s) AOC-S40G-i2Q
AOC-SGP-i2
AOC-SGP-i4
AOC-STG-b4S
AOC-STGN-i2S
AOC-STGN-i1S
AOC-STG-i2T
AOC-STG-i2
-
-
-
-
-
-
-
-
Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB
Hide Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.