 | |
 | | SSG-6027R-E1CR12L | - SuperServer 6027R-E1CR12L (Black)
| | | | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP) | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
| | SAS3 AOC | - SAS3 via Broadcom 3008 AOC; IT Mode/Pass-through
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | | | | Serial ATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 9x USB 2.0 ports total
(4 rear + 4 via header + 1 Type A) | | VGA | | | Serial Port / Header | - 1x Fast UART 16550 port / 1 Header
| | | | |
| | Form Factor | | | Model | | | | |
| | Width | | | Height | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
| | | | | PCI-Express | - 6x PCI-E 3.0 x8 slots (Low-profile, HL)
- Slot 1 & 2 Occupied by JBOD Expansion Port and HBA
| | | |
| | Hot-swap | - 12x 3.5" Hot-swap SAS3/SATA3 HDD bays w/ SES2
| | Optional | - 2x 2.5" Hot-swap HDD bays (rear)
| | | |
| | SAS3 Backplane: SAS3 12Gbps single expander backplane, w/ LSISAS3x28 expander, support 12x 3.5" drives, with 4x mini-SAS HD connectors, 2 for uplink and another 2 for downlink | | | |
| | Fans | - 3x 8cm 9.5K RPM, 4-pin PWM fans
| | | |
| | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| | DC Output | - 4 Amp @ +5V standby
- 75 Amp @ +12V
| | Certification |   Platinum Certified
[ Test Report ] | | | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
