You’ve ordered barebone system SYS-6028R-T, integrated with motherboard MBD-X10DRI. There is no need to worry about warranty for technical support to help you on CMOS battery replacement vs. BIOS config.
(1) Feedback/Discussion,
- Replace CMOS battery will not affect the data in hard drives, nor need to re-install OS.
- Do you have RAID created for the OS bootable drives?
o RAID created through onboard PCH?
o You may just enter SATA/eSATA configuration pages to change AHCI to RAID for the created RAID level.
- What other configuration, besides RAID SATA Configuration, you’ve set in BIOS?
o (Bullet-2 below will write our current BIOS setting and re-install them back with SUM commands)
(2) If you have many special configuration set in BIOS you may try steps below to re-install them after CMOS battery replacement.
a. Download SUM utility from https://www.supermicro.com/en/support/resources/downloadcenter/smsdownload
b. Check if you have OOB license (not found in your barebone order serial number database)
c. No OOB license then use in-Band command.
d. Please refence to page-223 https://www.supermicro.com/Bios/sw_download/636/SUM_UserGuide.pd for command usage.
e. EX: commands
i. [SUM_HOME]# ./sum -c GetCurrentBiosCfg --file USER_SETUP.file –overwrite
ii. [SUM_HOME]# ./sum -c ChangeBiosCfg --file USER_SETUP.file –reboot