TPM/Port 80 Header
The JTPM1 header on the X14DBG-MAP motherboard is used to connect a Trusted Platform Module (TPM)/Port 80, which is available from Supermicro (optional). A TPM/Port 80 connector is a security device that supports encryption and authentication in storage drives. It allows the motherboard to deny access if the TPM associated with the storage drive is not installed in the system. Information on the TPM is available at the following page:
For a detailed diagram of the X14DBG-MAP motherboard, see the layout under Quick Reference.
|
Trusted Platform Module Header Pin Definitions: 10 Total |
|||
|---|---|---|---|
|
Pin# |
Definition |
Pin# |
Definition |
|
1 |
+3.3 V |
2 |
SPI_CS# |
|
3 |
RESET# |
4 |
SPI_MISO |
|
5 |
SPI_CLK |
6 |
Ground |
|
7 |
SPI_MOSI |
8 |
No Connection |
|
9 |
+1.8 V Standby |
10 |
SPI_IRQ# |