TPM/Port 80 Header
The JTPM1 header on the H14DSH motherboard is used to connect a Trusted Platform Module (TPM)/Port 80, which is available from Supermicro (optional). A TPM/Port 80 connector is a security device that supports encryption and authentication in storage drives. It allows the motherboard to deny access if the TPM associated with the storage drive is not installed in the system. Go to the following link for more information on the TPM: https://www.supermicro.com/manuals/other/AOM-TPM-9670V_9670H__X12_H12.pdf.
For a detailed diagram of the H14DSH motherboard, see the layout under Motherboard Quick Reference.
|
Trusted Platform Module Header Pin Definitions: 10 Total |
|||
|---|---|---|---|
|
Pin# |
Definition |
Pin# |
Definition |
|
1 |
+3.3 V |
2 |
SPI_CS# |
|
3 |
RESET# |
4 |
SPI_MISO |
|
5 |
SPI_CLK |
6 |
Ground |
|
7 |
SPI_MOSI |
8 |
No Connection |
|
9 |
+1.8 V Stdby |
10 |
SPI_IRQ# |