NC-SI Connection

The Network Controller Sideband Interface (NC-SI) connection is located at JNCSI2 on the X14DBM-AP motherboard. This connection is used to connect a Network Interface Card (NIC) to the motherboard to allow the onboard Baseboard Management Controller (BMC) to communicate with a network.

Note: For detailed instructions on how to configure Network Interface Card (NIC) settings, refer to the Network Interface Card Configuration User's Guide posted on the web page under the link: https://www.supermicro.com/support/manuals.

For a detailed diagram of the X14DBM-AP motherboard, see the layout under Motherboard Quick Reference.