System Specifications

Single processor (Intel® Xeon® 6700/6500-series processor with P-cores or Intel® Xeon® 6700-series processor with E-cores) with Socket E2 LGA 4710 and a thermal design power (TDP) of up to 350 W

System on Chip

512 Mb AMI BIOS^® SPI Flash BIOS

ACPI 6.5 or later, Plug and Play (PnP) SPI dual/quad speed support, riser card auto detection support, SMBIOS 3.7.0 or later

Total eight DIMM slots that support up to 2 TB of RDIMM DDR5 ECC memory with speeds of up to 6400 MT/s

Default: Four front hot-swap 3.5" SATA drive bays

Option A: Four front hot-swap 2.5" PCIe 5.0 x4 NVMe drive bays

Option B: Four front hot-swap 3.5"/2.5" SAS drive bays

(NVMe/SAS support may require additional storage controller and/or cables; for details, see Optional Components)

Two M.2 PCIe 5.0 x2 NVMe slots (M-key 2280/22110; VROC required for RAID)

Two PCIe 5.0 x16 FHFL slots

One PCIe 5.0 x8 (in x16) LP slot

Two RJ45 1 GbE LAN ports

One RJ45 1 GbE Dedicated BMC LAN port (IPMI shared on LAN port 1)

Two USB 3.2 Gen1 Type-A ports (rear)

Two USB 3.2 Gen1 ports (header)

Two COM ports (one rear, one header)

One TPM header

One VGA port

X14SBW-F: proprietary 8" x 13" (230.2 mm x 330.2 mm) (WxL), WIO FF

CSE-815BTS-R000WNP: 1U rackmount 17.2" x 1.7" x 25.6" (437 x 43 x 650 mm) (WxHxD)

Default: Five 4-cm heavy-duty fans with optimal fan speed control

Optional: One add-on card cooling fan

One air shroud

One CPU heatsink

Two 860 W redundant Titanium level power supplies

Input:

800 W: 100–127 VAC / 50–60 Hz

860 W: 200–240 VAC / 50–60 Hz

860 W: 240 VDC / 50–60 Hz

Output:

+12 V Max: 66.67 A (100–127 VAC)

+12 V Max: 71.67 A (200–240 VAC)

+12 V Max: 71.67 A (240 VDC)

+5 VSB Max: 4 A

Operating Temperature: 10°C to 35°C (50°F to 95°F)

Non-operating Temperature: -30°C to 60°C (-30°F to 140°F)

Operating Relative Humidity: 8% to 80% (Non-Condensing)

Non-operating Relative Humidity: 8% to 90% (Non-Condensing)

FCC, ICES, CE, UKCA, VCCI, RCM, NRTL, CB

Certified by UL or CSA: 815-R8X14, 815-8, 815-R6X14, 815-6, 815-R6DX14, or 815-6D.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate Material-special handling may apply. See https://www.dtsc.ca.gov/hazardouswaste/perchlorate