Serial Port 2 Configuration Menu
Note: It can be "Serial Port 2 Configuration" or "SOL Configuration" based on your system support.
Serial Port 2/SOL ("Serial Port 2" or "SOL" based on your system support)
Select Enabled to enable serial port 2 (or SOL). The options are Disabled and Enabled.
Device Settings (Available when "Serial Port 2/SOL" above is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of serial port 2 (or SOL).
Change Settings (Available when "Serial Port 2/SOL" above is set to Enabled)
Use this feature to specify the base I/O port address and the Interrupt Request address of serial port 2 (or SOL). Select Auto for the BIOS to automatically assign the base I/O and IRQ address to serial port 2 (or SOL). The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;), (IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;), (IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;), and (IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;).
Serial Port 2 Attribute (Available for Serial Port 2 only)
Select SOL to use serial port 2 as a Serial Over LAN (SOL) port for console redirection. The options are SOL and COM.