Front Control Panel Connector
JFP1 contains header pins for various buttons and indicators that are normally located on a control panel at the front of the chassis. These connectors are designed specifically for use with the Supermicro chassis. See the table below for the descriptions of the front control panel buttons and LED indicators.
For a detailed diagram of the H14SHM motherboard, see the layout under Motherboard Quick Reference.
|
Front Control Panel Connector JFP1 Pin Definitions: 20 total |
|||
|---|---|---|---|
|
Pin# |
Definition |
Pin |
Definition |
|
20 |
GND | 19 | PWR_FAIL_LED_N |
|
18 |
no connection | 17 | no connection |
|
16 |
no connection | 15 | PWR_FAIL_LED_P |
|
14 |
GND | 13 | I2C_SCL |
|
12 |
I2C_SDA | 11 | GND |
|
10 |
+3.3 V | 9 | PWR_LED_N |
|
8 |
no connection | 7 | DRV_LED-N |
|
6 |
LAN1_LED_N | 5 | LAN2_LED_N |
|
4 |
INFO_LED_N | 3 | UID_LED_N |
|
2 |
UID_BTN_N | 1 | PWR_BTN_N |