System Specifications

Processors

Single Socket E2 (LGA-4710) Intel® Xeon® 6700/6500 with P-cores or 6700 series processors with E-cores up to 350W with air cooling

Core Count

P-cores: Up to 86C/172T; Up to 336MB Cache

E-cores: Up to 144C/144T; Up to 108MB Cache

Note: Supports up to 350W TDP CPUs (Air Cooled)* *Air Cooled CPUs with TDP over 205W only supported under specific conditions. Contact a Supermicro representative for details.

Chipset

System on chip

BIOS

AMI 64MB UEFI

Memory

Slot Count: Eight DIMM slots

Max Memory (1DPC): Up to 1TB 6400MT/s ECC DDR5 RDIMM

Memory Voltage: 1.1V

Storage Drives

Default: Total four bays

Two M.2 PCIe 5.0 x2 NVMe slots (M-key 22110)

Four rear hot-swap 2.5" NVMe* drive bays

(*NVMe support may require additional storage controller and/or cables)

PCI Expansion Slots

Default*

Three PCIe 5.0 x16 (in x16) HHFL slots

Three PCIe 5.0 x8 (in x8) HHFL slots

Option A*

Three PCIe 5.0 x16 (in x16) HHFL slots

Three PCIe 5.0 x8 (in x8) HHFL slots

One PCIe 5.0 x16 (in x16) FHFL double-width slot

(*Requires additional parts from the optional parts list for details.)

Input/Output

One RJ45 one GbE Dedicated BMC LAN port

Two RJ45 10 GbE LAN ports

Two USB 3.2 Gen 1Type-A ports (front)

One VGA port

Motherboard

X14SBI-TF: Proprietary

12.3" x 10.5" (31.24cm x 26.67cm)

Chassis

CSE-223M2-R000LPNDP

Height: 3.5" (89 mm)

Width: 17.2" (437 mm)

Depth: 17.72" (450 mm)

Package: 14.57" (H) x 23.23" (W) x 26.18" (D)

Gross Weight: 23 lbs (10.43 kg)

Net Weight: 17 lbs (7.7 kg)

System Cooling

4x 4-PIN PWM 8cm Fan(s)

One air shroud

Power Supply

1x 2000W Redundant Titanium Level (96%) power supply or 1x 1000W Redundant Titanium Level (96%) power supply

Operating Environment

Operating Temperature: 0°C to 40°C (32°F to 104°F)

n-operating Temperature: -40°C to 70°C (-40°F to 158°F)

erating Relative Humidity: 8% to 90% (non-condensing)

n-operating Relative Humidity: 5% to 95% (non-condensing)

Regulatory Compliance

FCC, ICES, CE, UKCA, VCCI, RCM, NRTL, CB

Certified Safety Models

Certified as compliant with UL or CSA

Perchlorate Warning

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate Material-special handling may apply. See https://www.dtsc.ca.gov/hazardouswaste/perchlorate

Applied Directives, Standards

Directives:

EMC/EMI: 2014/30/EU (EMC Directive)

Electromagnetic Compatibility Regulations 2016

FCC Part 15 Subpart B

ICES-003

VCCI-CISPR 32

AS/NZS CISPR 32

CISPR 32

CISPR 35

BS/EN 55032

BS/EN 55035

BS/EN 61000-3-2

BS/EN 61000-3-3

BS/EN 61000-4-2

BS/EN 61000-4-3

BS/EN 61000-4-4

BS/EN 61000-4-5

BS/EN 61000-4-6

BS/EN 61000-4-8

BS/EN 61000-4-11