Quick Reference Table
|
Jumper |
Description |
Default |
|---|---|---|
|
JBT1 |
Clear CMOS (Onboard) |
Short Pads to Clear CMOS |
|
JD1 |
External Speaker/Buzzer |
Pins 1–4: External Speaker Pins 3–4: Buzzer (Default) |
|
JPAC1 |
HD Audio Enable/Disable |
Pins 1–2 (Enabled) |
| JPCIESW | CPU PCIe SLOT3 1x8/2x4 |
Pins 1–2: Slot3 1x8 (Default) Pins 2–3: Slot3 2x4 |
| JPL1, JPL2 | LAN1/LAN2 Enable/Disable | Pins 1–2 (Enabled) |
| JPME2 | ME Manufacturing Mode | Pins 1–2 (Normal) |
|
JPT1 |
Onboard TPM 2.0 Enable/Disable |
Pins 1–2 (Enabled) |
|
JWD1 |
Watchdog Function Enable |
Pins 1–2 (Reset) |
|
LED |
Description |
Status |
|---|---|---|
| CATERR_LED | Catastrophic Error LED | Solid Orange: System CATERR |
|
LEDBMC |
Standby Power LED |
Solid Green: Standby Power On |
| LEDPWR | Onboard Power LED | Solid Green: Power On |
|
Connector |
Description |
|---|---|
|
12V_PUMP1 |
4-pin +12 V Power Connector (for CPU liquid cooling pump) |
|
AUDIO |
Rear High Definition Audio Ports |
|
AUDIO FP |
Front Audio Header * The default setting is for a headphone/microphone combo jack. If not using a chassis with the headphone/microphone combo jack, configure Frontside Audio Mode in the BIOS Setup utility. |
|
BT1 |
Onboard Battery |
|
COM1 |
COM Header |
|
DP_HDMI |
DP: Rear DisplayPort 2.1. HDMI: High Definition Multimedia Interface 2.1 |
|
FAN1, FAN1A, FAN2B, FANA |
System Fan Headers |
|
FAN2, FAN3, FAN3C |
CPU Fan Headers |
|
I-SATA0–I-SATA7 |
SATA 3.0 Ports (from Intel PCH, 6 Gb/sec, with support of RAID 0, 1, 5, and 10) |
|
JFP1 |
Front Control Panel Header |
|
JL1 |
Chassis Intrusion Header |
|
JLED1 |
3-pin Power LED Indicator Header |
|
JPW1 |
24-pin ATX Main Power Connector (Required) |
|
JPW2 |
8-pin +12 V CPU Power Connector (Required) |
|
JSD1 |
SATA Disk-On-Module (DOM) Power Connector |
|
JSTBY1 |
Standby Power Header (5 V) |
|
JTPM1 |
Trusted Platform Module (TPM)/Port 80 Header (TPM 2.0 only) |
|
LAN1, LAN2 |
LAN1: RJ45 1 GbE LAN Port LAN2: RJ45 2.5 GbE LAN Port |
|
M.2-C1 |
PCIe 5.0 x4 M.2 M-key Slot (from CPU, with support of 2280 form factor) * M.2-C1 and M.2-P1 can be mixed to support RAID 0 and 1. |
|
M.2-P1 |
PCIe 4.0 x4 M.2 M-key Slot (from PCH, with support of 2280 and 22110 form factors) * M.2-P1 and M.2-C1 can be mixed to support RAID 0 and 1. |
| PCH_PE1 0-7 (x4/ x4) | PCIe 4.0 x8 SlimSAS 8i Side-facing Connector supporting two U.2 connections (from PCH) |
|
SLOT3 |
PCIe 5.0 x8 (IN x16) Slot (from CPU, with support of 1x8 or 2x4 bifurcation) * SLOT3 will be enabled only when SLOT6 is populated. * SLOT3 supports single-width and double-width graphics cards. |
|
SLOT6 |
PCIe 5.0 x16 Slot (from CPU, with support of 1x8 or 1x16 bifurcation) * SLOT6 will function at PCIe 1x8 when SLOT3 is populated or when SLOT3 is configured to 2x4 bifurcation mode. * SLOT6 supports storage and graphics card only. |
|
SLOT7 |
PCIe 4.0 x4 Slot (from CPU) |
|
SP1 |
Internal Speaker/Buzzer |
|
USB0/1 |
Front Accessible USB 2.0 Header |
|
USB2/3 |
Front Accessible USB 3.2 Gen 1x1 Header (5 Gb) |
|
USB4 |
Front Accessible USB 3.2 Gen 1x1 Header (5 Gb, Vertical) |
|
USB5–USB7 |
Rear USB 3.2 Gen 2x1 Ports (10 Gb, Type-A) |
|
USB8 |
Rear USB 3.2 Gen 2x2 Port (20 Gb, Type-C) |
|
USB9 |
Front Accessible USB 3.2 Gen 2x2 Header (20 Gb, Type-C) |
|
USB10 |
Rear ThunderboltTM 4 (TBT 4) Port (40 Gb, Type-C) |