Front View
The following features are located on the front of SuperServer SYS-212B-LN2T.
Figure 1. SYS-212B-LN2T Front View
|
System Features: Front |
|
|---|---|
|
Drive Bays |
Description |
|
1 - 4 |
Four Hot-swap 2.5" NVMe Drive Bays* |
|
*NVMe support requires additional parts from the optional parts list |
|
Drive Carrier LED Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID configurations using a controller, the meaning of the status indicator is described in the table below.
|
Drive Carrier LED Indicators |
|||
|---|---|---|---|
|
LED |
Color |
Pattern |
Device Behavior |
|
Activity LED |
Blue |
Solid |
Idle SAS/NVMe drive installed |
|
Blue |
Blinking |
I/O activity |
|
|
Off |
N/A |
Idle SATA drive installed |
|
|
Status LED |
Red |
Solid |
Failure of drive with RSTe support |
|
Red |
Blinking at 1 Hz |
Rebuild drive with RSTe support |
|
|
Red |
Blinking with two blinks and |
Hot spare for drive with RSTe support |
|
|
Red |
On for five seconds, then off |
Power on for drive with RSTe support |
|
|
Red |
Blinking at 4 Hz |
Identify drive with RSTe support |
|
NVMe SSD LED Indicators
Each E1.S NVMe SSD module has two LED indicators: an activity indicator and a status indicator. For RAID configurations using a controller, the meaning of the status indicator is described in the table below. For OS RAID or non-RAID configurations, some LED indications are not supported, such as hot spare.
|
Rear I/O Ports |
|||
|---|---|---|---|
|
LED |
Color |
Pattern |
Device Behavior |
|
Activity LED |
Blue |
Solid |
Idle SAS/NVMe storage module installed |
|
Blue |
Blinking |
I/O activity |
|
|
Off |
N/A |
Idle SATA drive installed |
|
|
Status LED |
Red |
Solid |
Failure of drive with RSTe support |
|
Red |
Blinking at 1 Hz |
Rebuild drive with RSTe support |
|
|
Red |
Blinking with two blinks and one stop at 1 Hz |
Hot spare for drive with RSTe support |
|
|
Red |
On for five seconds, then off |
Power on for drive with RSTe support |
|
|
Red |
Blinking at 4 Hz |
Identify drive with RSTe support |
|
|
Green |
Solid |
Safe to remove NVMe storage module |
|
|
Amber |
Blinking at 1 Hz |
Do not remove NVMe storage module |
|