Accessing the System

The SYS-532AW-C has two removable side covers.

Removing the Side Cover

Begin by removing power from the system as described in Removing Power.

  1. Remove the two thumb screws on the rear of the chassis.

  2. Slide the cover toward the rear of the chassis.

  3. Remove the cover from the chassis.

Important: Except for short periods of time, do not operate the workstation without the cover in place. The chassis cover must be in place to allow for proper airflow and to prevent overheating.

Figure 8. Removing the Side Cover

Removing the Front Bezel

Remove the front bezel by pulling off the bottom first. Generally, this is only necessary when replacing the front fans.

Figure 9. Removing the Front Bezel