System Specifications
|
Processors |
|
Intel® Xeon® 6700 series processors with E-cores (in Socket E2 LGA4710) with four UPIs (24 GT/s max.) and a thermal design power (TDP) up to 165 W. Note: Dual processors with TDPs exceeding 165 W can be supported under limited conditions. Please contact Supermicro support for details. |
|
Chipset |
|
System on Chip |
|
BIOS |
|
AMI 32 MB SPI Flash |
|
Memory |
|
Slot Count: 16 DIMM slots Max Memory (1 DPC): Up to 4 TB 6400 MT/s ECC DDR5 RDIMM |
|
Storage Drives |
|
Default: Total three bays per node Two front hot-swap 3.5" PCIe 5.0 NVMe/SAS drive bays One front hot-swap 3.5" PCIe 4.0 NVMe/SAS drive bay Two M.2 PCIe 5.0 x2 NVMe slots (M-key 22110; VROC required for RAID) |
|
PCI Expansion Slots (Per Node) |
|
Default: Two PCIe 5.0 x16 (low-profile) slots One PCIe 5.0 x16 AIOM slot (OCP 3.0 Compatible) |
|
Input/Output (Per Node) |
|
LAN: One RJ45 1 GbE Dedicated BMC LAN port USB: Two USB 3.2 Gen1 Type-A ports (rear) Video: One VGA port |
|
Motherboard |
|
X14DBT-B; proprietary 7.617" (W) x 18.86" (L) (193.47 mm x 478 mm) |
|
Chassis |
|
CSE-827BQ2-R3K60P; 2U rackmount; (WxHxD) 17.68" x 3.47" x 30.5" (449 x 88 x 774 mm) |
|
System Cooling |
|
Fans: Four 14.9 K RPM heavy-duty 80 x 80 x 38 mm fans Liquid Cooling: Direct to Chip (D2C) Cold Plate (optional) |
|
Power Supply |
|
Two 3600 W Redundant (1 + 1) Titanium Level (96%) power supplies Dimension (W x H x L) 45 x 40 x 480 mm AC Input 3600 W: 0240 Vdc / 50-60 Hz (for CQC only) 1400 W: 100-127 Vac / 50-60 Hz 3000 W: 200-207.9 Vac / 50-60 Hz 3100 W: 208-219.9 Vac / 50-60 Hz 3250 W: 220-229.9 Vac / 50-60 Hz 3450 W: 230-237.9 Vac / 50-60 Hz 3600 W: 238-240 Vac / 50-60 Hz +12V Max: 112 A / Min: 0 A (100 Vac-127 Vac) Max: 240 A / Min: 0 A (200 Vac-207.9 Vac) Max: 248 A / Min: 0 A (208 Vac-219.9 Vac) Max: 260 A / Min: 0 A (220 Vac-229.9 Vac) Max: 276 A / Min: 0 A (230 Vac-237.9 Vac) Max: 288 A / Min: 0 A (238 Vac-240 Vac) 12 V SB Max: 4.5 A / Min: 0 A Output Type: Backplanes (gold finger) |
|
Operating Environment |
|
Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -30°C to 60°C (-30°F to 140°F) Operating Relative Humidity: 8% to 80% (Non-Condensing) Non-operating Relative Humidity: 8% to 90% (Non-Condensing) |
|
Regulatory Compliance |
|
CE, ICES, FCC, RCM, UKCA, NRTL, CB |
|
Certified Safety Models |
|
827B-36 or 827B-R36X14 |
|
Applied Directives, Standards |
|
EMC/EMI: 2014/30/EU (EMC Directive) Electromagnetic Compatibility Regulations 2016 FCC Part 15 Subpart B ICES-003 VCCI CISPR 32 AS/NZS CISPR 32 BS/EN55032 BS/EN55035 CISPR 32 CISPR 35 BS/EN 61000-3-2 BS/EN 61000-3-3 BS/EN 61000-4-2 BS/EN 61000-4-3 BS/EN 61000-4-4 BS/EN 61000-4-5 BS/EN 61000-4-6 BS/EN 61000-4-11 Product Safety: 2014/35/EU (LVD Directive) UL/CSA 62368-1 (USA and Canada) Electrical Equipment (Safety) Regulations 2016 IEC/BS/EN 62368-1 Environment: 2011/65/EU (RoHS Directive) EC 1907/2006 (REACH) 2012/19/EU (WEEE Directive) California Proposition 65 |
|
Perchlorate Warning |
|
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate Material-special handling may apply. See https://www.dtsc.ca.gov/hazardouswaste/perchlorate |