System Event Log Menu
Note: All values changed in this submenu do not take effect until computer is restarted.
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are Disabled and Enabled.
Erasing Settings
Erase SEL (Available when "SEL Components" is set to Enabled)
Select (Yes, On next reset) to erase all system event logs upon next system boot. Select (Yes, On every reset) to erase all system event logs upon each system reboot. Select No to keep all system event logs after each system reboot. The options are No, (Yes, On next reset), and (Yes, On every reset).
When SEL is Full (Available when "SEL Components" is set to Enabled)
This feature defines what the BIOS should do when the system event log is full. Select Erase Immediately to erase all events in the log when the system event log is full. The options are Do Nothing and Erase Immediately.