Supermicro, Inc.

  A+ Products   Motherboards   [ H8DMT-INF+ ]
Dual/Quad-Core AMD Opteron 2000 Series
1U Twin with Infiniband

Key Features
1. Two Six-Core / Quad-Core / Dual-Core
    AMD Opteron™ 2000 Series (Socket F)
    support; HT3.0 Link support ^
2. nVidia MCP55V Pro Chipset
3. Up to 128GB of ECC, Registered
    DDR2 800/667/533 SDRAM
4. Dual-port Gigabit Ethernet
    LAN Controller
5. Four SATA2 3.0Gb/s HDD Support
    RAID 0, 1, 0+1, 5, JBOD
6. One PCI-Express (x16) Slot
7. XGI Z9S 32MB Graphics
8. SIMSO IPMI 2.0 Support
9. Infiniband MT25204 20Gbps Controller
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities

RoHS 6/6    

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
  • H8DMT-INF+ (Bulk Pack)
Physical Stats
Form Factor
  • Proprietary
  • 16.64" x 6.8" (42.3cm x 17.3cm)
  • Dual 1207-pin Socket F
  • Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
  • HT3.0 Link support ^
  • Two Hyper-Transport links between the CPUs
  • nVIDIA MCP55V Pro
 Note: SE processors not recommended for 1U chassis
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Supports up to 128GB DDR2 800/667/533 MHz memory*
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • For Single CPU: Memory must be populated in CPU1 DIMMS only
  • Dual channel memory bus
Memory Type
  • DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
On-Board Devices
  • nVidia MCP55V-Pro SATA2 3.0Gbps Controller
  • 4 SATA Ports
  • nVidia RAID 2.0
  • SATA RAID 0, 1, 0+1, 5, JBOD Support
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI Socket (SIMSO)
  • (Optional: AOC-SIMSO(+)  R 3.00) **
  • RMM (Remote Management Module)
  • (Card not included)
Network Controllers
  • nVidia MCP55V Pro Chipset Dual-port LAN / Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • XGI Z9S Graphics Controller
Super I/O
  • Winbond 83627DHG
Input / Output
  • 4x SATA ports
  • 2x RJ45 LAN ports
  • 2x USB rear ports
  • 2x USB internal headers
  • 2x USB internal ports (Type A)
  • Total of 6 USB 2.0 Compliant ports
  • 1x VGA Port
Serial Port
  • 1x Header, 1x Port
  • 1x External InfiniBand Connector
Expansion Slots
  • One PCI-Express (x16) Slot
  • IPMI 2.0 expansion slot
Chassis ( Optimized for H8DMT-INF+ )
1U Chassis
  • CSE-808T-980(B/V) Revision A4
* Please use:
  Air-shroud (MCP-310-80802-0B)
  & CPU heat sink (SNK-P0022+)
  Both are sold separately
System BIOS
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0/2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • CPU Fan auto-off in sleep mode
  • Power-on mode control for AC power loss recovery
PC Health Monitoring
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
  • Total of Four proprietary fan headers supporting up to 8 fans
  • 8x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on / off control
  • Low noise fan speed control
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Status
  • I2C Temperature Sensing Logic
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Operating Environment / Compliance

RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
OS Compatibility
• Please see our OS Compatibility Chart
Pack List
  Part Number Qty Description
H8DMT-INF+ MBD-H8DMT-INF+ -O 1 H8DMT-INF+ Motherboard
I/O Cable 1 CBL-0044L 4 57.5CM SATA FLAT S-S PBF
  * Fully populated DDR2 667 or 800 will be downgraded to DDR2 533
 ** It is recommended to use dedicated LAN for KVM-over-LAN with fast speed needed.
 ^ HT Link speed supporting depends on AMD Opteron processor spec.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed: