 | |
 | | MBD-H8SSL-i2-O | - H8SSL-i2 (Standard Retail Pack)
| | MBD-H8SSL-i2-B | | | | |
| | Form Factor | | | Dimensions | - 12.0" x 8.0" (30.5cm x 20.3cm)
| | | | | CPU | - Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series
(Socket AM2) processor
NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor | | System Bus | | | Chipset | | | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
| | Memory Type | - DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | |
| | SATA | - 4 SATA Ports using ServerWorks HT1000 controller
| | IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
| | IPMI | | | Network Controllers | - Broadcom BCM5704C Dual Gigabit Ethernet Controller
- Supports 1000BASE-T, RJ45 output
| | VGA | - ATI ES1000 Graphics Controller
16MB Graphics & VGA port | | Super I/O | | | | |
| | SATA | | | IDE | - Single ATA 100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA/100
| | Floppy | | | LAN | | | USB | - 2 USB Rear Ports
- 4 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial ports
- 1 Header
| | | | |
| | Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V) and 24-pin are required] | | | |
| | PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slot
| | PCI | - 2 PCI 32-bit, 33MHz expansion slots
| | | |
| | BIOS Type | - 4Mb Flash EEPROM with AMI® BIOS
- SST-49LF004B BIOS Chip
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus Protection
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages, +5V, ±12V, 5.5V Standby, 2.5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
| | FAN | - Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
| | LED | - CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
- SDDC Support
- Chipkill Support
| | | RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III