Super Micro Computer, Inc.
Contact Us


  Products   Motherboards   Archived (EOL)   [ P4SC8 ]

Enlarge Image   Enlarge Image

Key Features
1. Intel® Pentium® 4 Support up to
    3.4 GHz, Celeron® up to 2.4 GHz
2. Intel® E7210 (Canterwood ES) Chipset
3. Up to 4GB DDR 400/333/266 SDRAM
4. 1x Intel® 82547GI CSA,
    1x Intel® 82541 Gb Ethernet Controller
5. Intel® H6300ESB Serial ATA Controller
6. Adaptec AIC-7902 Dual-Channel
    Ultra320 SCSI
7. 2x 64-bit 66MHz PCI,
    2x 32-bit 33MHz PCI (5V) slots
8. ATI RageXL 8MB PCI Graphic Controller

Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKU - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
  • P4SC8
Physical Stats
Form Factor ATX
Dimensions 12" x 9.5", (30.5cm x 24.1cm)
CPU • Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Pentium® 4 processor with 1MB of integrated Advanced Transfer Cache up to 3.2GHz
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz
• Hyper-threading enabled
System Bus 800 / 533 / 400MHz system bus
System Memory
Memory Capacity • Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs
Memory Type DDR400/333/266 (ECC or non-ECC) unbuffered SDRAM, 184-pin gold-plated DIMMs
DIMM Sizes 128MB, 256 MB, 512 MB, 1 GB
Memory Voltage 2.5 V only
On-Board Devices
Chipset • Intel® E7210 (Canterwood ES) chipset
• MCH + 6300ESB + FWH
SCSI • Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI
  • Support for Zero-Channel RAID
  • Optional: (Card not included)
  • Serial ATA • SATA Controller on-chip (Intel® 6300ESB)
    • Dual Serial ATA ports
    • RAID 0, 1 Supported
    Network Controllers • 1x Intel® 82547GI CSA Gigabit Ethernet Controller
    • 1x Intel® 82541 Gigabit Ethernet Controller
    • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    Graphics ATI Rage XL SVGA PCI video controller with 8 MB of video memory
    Input / Output
    PCI Expansion • 2x 64-bit 66MHz PCI-X (3.3V) slots
    • 2x 32-bit 33MHz PCI (5V) slots
    IDE • Dual EIDE channels support up to four UDMA IDE devices
    • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    Floppy 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
    USB • 2x USB 2.0 / 1.1 ports
    • 1x USB header supports additional 2x USB 2.0 / 1.1 ports)
    Serial Ports 2x Fast UART 16550 serial ports
    VGA Port 1x VGA Port
    Parallel Port 1x ECP/EEP Parallel Port
    LAN Port 2x RJ45 Ports
    Keyboard / Mouse PS/2 keyboard and mouse ports
    Chassis ( Optimized for P4SC8 )
    1U Chassis SC813MS-300C
    2U Chassis SC822S-400LP
    Rackmount Tower / 4U SC742S-420
    Important Note To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
    System BIOS
    BIOS Type 8Mb Flash EEPROM with AwardBIOS®
    BIOS Features • Plug and Play (PnP)
    • APM 1.2
    • DMI 2.3 support
    • PCI 2.3
    • ACPI 1.0
    • BIOS rescue hot keys
    • Hardware BIOS virus protection
    • USB Keyboard support
    Software SuperDoctor® III
    • Watch Dog
    Power Configurations • ACPI/APM Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Suspend to RAM (STR)
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
    PC Health Monitoring
    Voltage • Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
    • CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
    • Adjustable CPU clock frequency ratio settings (via BIOS)
    FAN • Total of five 3-pin fan headers
    • 3x fans with tachometer monitoring
    • Status monitor with firmware/software on/off control
    Temperature • Monitoring for CPU, chassis, environment
    • CPU thermal trip support
    LED • CPU Overheat LED
    • System Overheat LED
    • +5V standby alert LED
    • Suspend-state indicator LED
    Other Features • Chassis intrusion detection
    • Chassis intrusion header
    Standard Retail Package
    Part Number Qty Description
    P4SC8 MBD-P4SC8-O 1 P4SC8 Motherboard
    Manual(s) MNL-0718
    Manual for P4SC8
    Ultra320 SCSI Manual
    Retention Kits SKT-109 1 Pentium 4, 478 Pin CPU Retention Module
    I/O Cables CBL-010L-01
    9-pin Serial Port Cable
    ATX Floppy Cable
    LVD, Ultra320 SCSI Cable
    ATA 66/100 IDE LP Cable
    2 Ft. Amphenol Serial ATA Cable
    Driver Disk CDR-INTC 1 Version 1.10 Chipset Driver CD
    I/O Shield CSE-PT7 1 I/O Shield For Dual LAN

    Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
    Information in this document is subject to change without notice.
    Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.