| | Form Factor | | ATX | | Dimensions | | 12" x 9.625" (30.5cm x 24.5cm) | | | | CPU | | Single mPGA604 ZIF Socket Supports one Intel® Xeon® processor with 512KB L2 (or 1MB L3) integrated Advanced Transfer Cache up to 3.06GHz | | System Bus | | 533MHz/400MHz system bus | | | | Memory Capacity | | Four 184-pin DIMM sockets Supports up to 4 GB DDR266/200 memory | | Memory Type | | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | DIMM Sizes | | 128MB, 256 MB, 512 MB, 1 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Serverworks GC-SL Chipset | | Network Controllers | | 1x Broadcom 5702 Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | PCI Expansion | | 3x 64-bit 33MHz PCI (3.3V) slots 2x 32-bit 33MHz PCI (5V) slots | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 4 USB ports | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | 1 ECP / EEP parallel port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | 2U Chassis | | SC822i-300LP | | 4U Rackmount / Tower | | SC742i-420 SC942i-550 | | Important Note | | To ensure system stability, a 400W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | BIOS Features | | Plug and Play (PnP) SMBIOS 2.3 APM 1.2 DMI 2.1 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection | | | | Software | | SuperDoctor® III Watch Dog | | Power Configurations | | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Power-on mode control for AC power loss recovery Internal/External modem remote ring-on FUCI (Frontside USB Control Interface) | | | | Voltage | | Monitors for CPU Cores, +2.5V, +3.3V, +5V, ±12V CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.3V-1.6V | | FAN | | Total of three 3-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | |