| | MBD-X6DH8-XG2-O | - X6DH8-XG2 (Standard Retail Pack)
| MBD-X6DH8-XG2-B | | | | Form Factor | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | | | | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400 memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD support
| RAID | - Support for Zero-Channel RAID
- Optional: (Card not included)
| IPMI | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| Super I/O | | | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| LAN | | USB | - 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 2 Fast UART 16550 serial ports
| | | | | 2U Chassis | | 3U Chassis | | Tower / 4U Rackmount | | Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] - Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
| | | PCI-Express | - 1 (x8) on a (x16) PCI-e slot
| PCI-X | - 3x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-0.63V
| FAN | - Total of four 4-pin and four 3-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 support
| LED | - CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| |