| | MBD-X6DHP-iG-B | | | | Form Factor | | Dimensions | - 9.6" x 16.2" (24.4cm x 41.1cm)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | | | | Memory Capacity | - Six 184-pin DIMM sockets
- Supports up to 16 GB DDR 333 memory or
- Supports up to 32 GB DDR 266 memory
- Dual-channel memory bus
- Memory must be populated in pairs
| Memory Type | - DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| IPMI | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| Super I/O | | | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 2 Fast UART 16550 serial ports
| | | | | 1U Chassis | | Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply
[8-pin (+12V) and 20-pin are required] - Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
| | | PCI-Express / PCI-X | - 2x Universal (SXB-E) slots
[1 (x8) and 1 (x4) using (x8 slots)] OR [2x 64-bit PCI-X 133MHz slots] | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 1.0
- Fan Speed Control
| | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
| | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
| FAN | - Total of five proprietary fan headers
- 10x fans with status monitoring
- Status monitor for speed control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for fan connectors
- Thermal Monitor 2 support
| LED | - CPU / System Overheat LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |