 | |
 | | MBD-X6DHR-C8-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | | | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH/V + 4x 82546GB + CN-1230
| | SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| | SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 (Optional [1U: 1UIPM20-E])
| | Security | - Cavium Nitrox®
- Cavium CN-1230 Security Microprocessor
- Supports firewall VPN, SSL VPN, Intrusion Detection, Security and Gateway Application Servers
- High-Performance SSL and IPsec
- Integrated Networking with routers, switches, web-servers, server load balancers, firewalls, SANs and VPN Gateways
- RJ45 / SFP (optical) output
| | Network Controllers | - Intel® 82546GB (Anvik II) Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45/SFP output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | | |
| | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| | IDE | - One slim IDE channel support up to two UDMA IDE devices
- Supports ATA/100
- 50-pin Compact Flash Type-I slot
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | - 4x RJ45 LAN ports and
- 4x SFP (Small Form-factor Pluggable)
| | USB | - 2x USB rear ports
- 1x USB internal headers (supports 2 ports)
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports (1 port, 1 header)
| | | | |
| | 1U Chassis | SC813S-500C-C8 | | Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] - Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
| | | |
| | PCI-Express / PCI-X | - 1x Universal (SXB-E) slot
[ 1 (x8) PCI-Express slot ]
or
[ 1x 64-bit PCI-X 100MHz slot ] | | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
| | | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | Voltage | - Monitors for CPU Cores (+1.8, +3.3V, +5V, ±12V & +3.3V Standby, and VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
| | FAN | - Total of four 3-pin fan headers
- Total of four 4-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Status monitor for speed control
- Pulse Width Modulated(PWM) fan connector
- Support 3-pin fans(without speed control)
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
| |
