 | |
 | | MBD-X6DHR-TG-B | | | | | | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | | | | Memory Capacity | - Eight 184-pin DIMM sockets
- Supports up to 32GB DDR 266MHz or up to 16GB DDR 333MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR 333/266MHz buffered (registered) ECC SDRAM, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH/V + 82546GB
| | SATA | - ICH5R SATA 2-port Controller
- RAID 0, 1 support
| | SATA | - Adaptec AIC-8130: Marvell 88SX6041 4-port Hercules-2, rev C0, SATA Controller
- RAID 0, 1, JBOD support
| | Zero-Channel RAID | - Supports RAID 0, 1, 5, 10, JBOD
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
- (Card not included)
| | IPMI | | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | | | | Serial ATA | - Two ICH5R Serial ATA ports
- Four Marvell Serial ATA ports
- Up to Six SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
| | Floppy | | | LAN | | | USB | - 2x USB rear ports
- 1x USB dual internal headers supporting up to 2 USB ports
- USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial ports / 1 header
| | | | | | 1U Chassis | | | Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required] - Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
| | | | | PCI-Express / PCI-X | - 2 PCI-Express (x8) slots
- 1 PCI-X 64-bit 133MHz slot
- 1 PCI-X 64-bit 100MHz slot
| | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - USB Keyboard Support
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
| | FAN | - Total of five 3-pin fan headers
- Status monitor for speed control
| | Temperature | - Monitoring for CPU, chassis environment
- CPU Thermal Trip Support
- Thermal Monitor 2 (TM2) Support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
| |
