| | MBD-X7DVL-3-O | - X7DVL-3 (Standard Retail Pack)
| MBD-X7DVL-3-B | | | | Form Factor | | Dimensions | - 12" x 10" (30.5cm x 25.4cm)
| | | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below: - Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz | System Bus | - 1333 / 1066 / 667 MHz system bus
| Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
| Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
| SAS | - Broadcom 1068E PCI-E SAS Controller
- 8 SAS Ports supporting up to 8 SAS HDD
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
| SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLC)
| Network Controllers | - Two Intel® (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - XGI Volari™ Z7 PCI-E Graphics Processor
| Clock Generator | | Super I/O | | | | SAS | - Eight SAS ports
- Eight SAS hard drives supported
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB Support
| LAN | | USB | - 2x USB rear ports
- 2x USB internal headers for up to 4-ports
- Total 6 USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| Parallel Port | - 1 Header for ECP / EEP parallel port
| | | | | 1U Chassis | | 2U Chassis | | Mid-Tower | | Tower / 4U Rackmount | | Important Chassis Notes | - To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required] | | | Universal Slot | - 1x (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X Slot
| PCI-X | - 1x 64-bit 133MHz PCI-X slot
| PCI | - 1x 32-bit 33MHz PCI (5V) slots
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
| | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
| | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V
- 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
- Adjustable CPU Clock Frequency Ratio
| FAN | - Total of six proprietary 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5V Standby Alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | FCC | - Passed to meet FCC standard requirement
| |