Super Micro Computer, Inc.
Contact Us


  Products   Motherboards   Xeon Boards   [ X7QCE ]
  • Xeon 6-Core / Quad-Core / Dual-Core Sever MainBoard

Key Features
1. Quad Intel® 64-bit Xeon® MP
    Support 1066 MHz FSB
2. Intel® 7300 (Clarksboro) Chipset
3. Up to 192GB DDR2 ECC FB-DIMM
    (Fully Buffered DIMM)
4. Intel® 82575EB Dual-port
    Gigabit Ethernet Controller
5. 6x SATA (3 Gbps) Ports via ESB2
6. 1 (x8) PCI-e (using X16 slot),
    1 (x8) PCI-e (using x8 slot) &
    1 (x4) PCI-e (using x8 slot)
    1x 64-bit 133MHz PCI-X
7. ATI ES1000 Graphics with
    32MB video memory
8. IPMI 2.0 (SIMSO) Slot

Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs
  • X7QCE (Standard Retail Pack)
  • X7QCE (Bulk Pack)
Physical Stats
Form Factor
  • Proprietary
  • 16" x 14.3" (40.6cm x 36.3cm)
  • Quad 604-pin FC-PGA6 Sockets
  • Supports up to four Intel® 64-bit Xeon® MP processor(s) of the same type below:
  • 6-Core Intel® Xeon®
    Processor 7400 sequence
  • Quad-Core Intel® Xeon®
    Processor 7300 sequence
  • Dual-Core Intel® Xeon®
    Processor 7200 sequence
System Bus
  • 1066 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
System Memory
Memory Capacity
  • Twenty-four 240-pin DIMM sockets
  • Supports up to 192 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
  • Dual branch memory bus
  • Memory must be populated in pairs
  • Memory Mirroring supported
Memory Type
  • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
  • 1.5V (AMB)
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
  • Intel® 7300 (Clarksboro) chipset
  • ESB2
  • Intel ESB2 SATAII Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMSO)
  • (Optional: AOC-SIMSO(+))
  • For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
Network Controllers
  • Intel® 82575EB Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT support for fast, scaleable, and reliable networking
  • ATI ES1000 controller with 32 MB of video memory
Super I/O
  • Winbond 83627HF chip
Clock Generator
  • CK410B chip
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
  • Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • Compact Flash (40-pin connector, IDE 1, single channel) slot
  • 1 Floppy controller; 1.44 MB, 2.88 MB
  • 2x RJ45 LAN ports
  • 2x USB rear ports
  • 3x USB internal header
  • 5 total USB ports, 2.0 Compliant / 1.1 Compliant
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Header
Chassis ( Optimized for X7QCE )
1U Chassis
  • CSE-818TQ-1000 (Supports CPUs running at 80W or less only)
2U Chassis
  • CSE-828TQ-R1200
Tower / 4U Rackmount
  • CSE-748TQ-R1200
Important Chassis Notes
  • To ensure system stability, a 500W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Expansion Slots
  • 1 (x8) PCI-e (using x16)slot
  • 1 (x8) PCI-e (using x8) slot
  • 1 (x4) PCI-e (using x8) slot
  • 1x 64-bit 133MHz PCI-X (3.3V) slots
System BIOS
  • 8Mb Flash EEPROM with AMI ® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0/2.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.3
  • Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/ACPM Power Management
  • Main Switch Override Mechansim
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode for AC power recovery
  • Internal/External modem remote ring-on
PC Health Monitoring
  • Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
  • CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
  • Total of nine 4-pin fans
  • 9x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support for 3-pins (w/ speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 9x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
  • CPU / System Overheat LED
  • Suspend-state Indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • Chipkill Support
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35°C (50° to 95°F)
  • Non-operating Temperature: -40° to 70°C (-40° to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X7QCE MBD-X7QCE -O 1 X7QCE Motherboard
Manual(s) MNL-0955 1 Motherboard Manual for X7QCE
I/O Cables CBL-022L
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
Driver Disk CDR-INTC-Q 1 Version 1.00 CD or later
I/O Shield CSE-PT7L 1 Motherboard I/O Shield

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.