X8DTE-F
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X8DTE-F ]

5 PCI-E 2.0 Xeon Tylersburg ServerBoard

Key Features
1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s
2. Intel® 5520 (Tylersburg) Chipset
3. Up to 192GB DDR3 1333/ 1066/ 800MHz
    ECC Registered DIMM / 48GB
    Unbuffered DIMM
4. Dual Intel® 82574L Gigabit
    Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via
    ICH10R Controller
6. 4 (x8) PCI-E 2.0,
    1 (x4) PCI-E 2.0 and 1 (x4) PCI-E slot
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN

 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X8DTE-F -O
  • X8DTE-F (Standard Retail Pack)
MBD-X8DTE-F -B
  • X8DTE-F (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13" (30.5cm x 33cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM slots
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83827HF chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB rear ports
  • 2x USB on-board (TypeA)
  • 4x USB internal headers
  • Total 8 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
Chassis ( Optimized for X8DTE-F )
1U Chassis
  • CSE-812L-600CB
2U Chassis
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
  • 4 (x8) PCI-E 2.0 slots
  • 1 (x4) PCI-E 2.0 slot
  • 1 (x4) PCI-E slot
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X8DTE-F MBD-X8DTE-F-O 1 X8DTE-F Motherboard
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-0083L 1 15.7" USB 2.0 2-PORT W/KEY
I/O Cable 3 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 4 CBL-022L 1 ATX FLOPPY CABLE 3 HEADERS PB FREE
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)
Manual MNL-1112-QRG 1 X8DTE/X8DT6/X8DTE-F/X8DT6-F QUICK REFERENCE GUIDE

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.