| | SYS-1017GR-TF-FM109 | - SuperServer 1017GR-TF-FM109 (Black)
| | | CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 12 cores and up to 130W) | Note | † BIOS version 3.0 or above is required | Cache | | System Bus | | GPU | - supports M2075/M2090, up to 130W CPU at 35°C
| | | Memory Capacity | - 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
| Memory Type | - 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors
(using ECC memory) | | | GPU | - 1x NVIDIA Tesla M2090 Fermi GPU card
| Chipset | | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | | Super I/O | | | | SATA | - 2 SATA 3.0 ports (6Gbps)
- 4 SATA 2.0 ports (3Gbps)
| LAN | - 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
| USB | - 6 USB 2.0 ports total
(2 rear + 4 via headers) | Video | | Keyboard/Mouse | - 1 PS/2 Keyboard/Mouse port
| Serial Port | | DOM | - 1 DOM (Disk on Module) power connector
| | | BIOS Type | - 64Mb SPI Flash EEPROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Color | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED | | | PCI-Express | - 2 (x16) PCI-E 3.0 slots (1x NVIDIA Tesla M2090 Fermi GPU card integrated)
- 1 (x8) PCI-E 3.0 slot for I.B. card
| | | Hot-swap | - 6x 2.5" Hot-swap drive bays
| | | SAS/SATA HDD Backplane (SAS support requires optional SAS controller) | | | | Fans | - 8x counter-rotating fans with optimal fan speed control
| | | 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | AC Voltage | - 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
- 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
| +5V standby | | +12V | - 100 Amp/115 Vac
- 117 Amp/230 Vac
| With Power Distributor | | Certification | Platinum Certified | | | CPU | - Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 5-Phase-switching voltage regulator
| FAN | - Total of eight 4-pin PWM fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
| Other Features | | | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |