| | SYS-1025W-URB | - SuperServer 1025W-URB (Black)
| | | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | System Bus | - 1600 / 1333 / 1066 MHz system bus
| | | Memory Capacity | - Eight 240-pin DIMM slots
- Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
| Memory Type | - 800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® 5400 (Seaburg) chipset
- MCH + ESB2
| SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
| Network Controllers | - Intel® 82575EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| Graphics | - ATI ES1000 controller with 32 MB of video memory
| Super I/O | | Clock Generator | | | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
- UID button
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
| | | Left Slot | - 1 Unversal I/O (UIO) Slot AND
- 1 (x8) PCI-E 2.0 Slot
| Right Slot | - 1 (x8) PCI-E 2.0 Slot (Low profile size w/ 5.5" length)
| | | Hot-swap | - 8x Hot-swap 2.5" SAS / SATA HDD trays (w/ optional UIO SAS controller card)
| | | 1x 1U SAS / SATA backplane | | | DVD-ROM | | | | Fans | - 4x Cooling Fans
- 2x Optional cooling fans for add-on cards
| Shroud | | | | 650W (1 + 1) Redundant AC-DC power supply w/ PFC | AC Voltage | - 100 - 240V, 60-50Hz, 8-4 Amp
| +5V standby | | +12V | | With Power Distributor | - +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
| | | BIOS Type | - 16Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |