 | |
 | | SYS-5013G-i | - SuperServer 5013G-i (Beige)
| | SYS-5013G-iB | - SuperServer 5013G-iB (Black)
| | | | CPU | | • Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 512KB of integrated Advanced Transfer Cache up to 3.06GHz
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.2GHz |  | | System Bus | | 533 / 400MHz system bus | | | | | Memory Capacity | | • Two 184-pin DIMM sockets
• Supports up to 2 GB of DDR333/266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR333/266/200 non-ECC, unbuffered SDRAM, 184-pin gold-plated DIMMs | | | DIMM Sizes | | 256 MB, 512 MB, 1 GB | | | Memory Voltage | | 2.5 V only | | | | | Chipset | | • Intel® 845GE chipset
• GMCH + ICH4 | | | Network Controllers | | • Dual Intel® 82540EM Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | Graphics | | On-chip Intel® EXTREME Graphics Accelerator | | | | | 1x full-height, full-length 32-bit 33MHz PCI expansion slot (Riser card required) | | | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | USB | | Up to 6 USB ports | | | Infrared | | 1 Infrared port header | | | Serial Ports | | 2 Fast UART 16550 serial ports | | | Parallel Port | | 1 ECP/EEP Parallel Port | | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | BIOS Type | | 4Mb Flash EEPROM with AwardBIOS® | | | BIOS Features | | • Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.2
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support | | | | | | | Form Factor | | 1U Rackmount | | | Model | | SC810 | | | | | Height | | 1.7" (43mm) | | | Width | | 16.8" (426mm) | | | Depth | | 22.6" (574mm) | | | Gross Weight | | 34 lbs (15.4 kg) | | | Available Colors | | Beige, Black | | | | | Buttons | | • Power On/Off button
• System Reset button | | | LEDs | | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED | | | | | Internal Bay | | 2x 3.5" Internal Drive Bays | | | | | Thermal control 250W AC power supply [ 24-pin ] | | | AC Voltage | | • 100 - 240V, 47-63Hz, 4 Amp | | | DC Output | | • 5V + 3.3V ≤ 230W
• 12V + 5V + 3.3V ≤ 250W | | | +5V | | 25.0 amp | | | +5V standby | | 2.0 amp | | | -5V | | 0.3 amp | | | +12V | | 13.0amp | | | -12V | | 0.8 amp | | | +3.3V | | 20.0 amp | | | | | CPU | | • Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.1V-1.85V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of four 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection
• Chassis intrusion header | | |
