| | SYS-5015A-PHF | - SuperServer 5015A-PHF(Black)
| | | CPU | - Intel® Atom™ D510 processor
| System Bus | | | | Memory Capacity | - Two 200-pin SO-DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR2 667MHz SO-DIMM (Single Channel)
| Memory Type | - DDR2 667MHz unbuffered, non-ECC SO-DIMM
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | | SATA | - Intel ICH9R SATA 3.0Gbps Controller
- RAID 0, 1 support
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - 2x Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| Graphics | - Onboard Matrox G200eW video
| Super I/O | | | | Serial ATA | - 6 Serial ATA ports ( 3Gbps )
| LAN | | USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear + 3 headers (5 ports) + 1 Type A connector
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | | BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
| | | Internal Bay | - 1x 3.5" Internal Drive Bay (Standard)
- OR 2x 2.5" Internal Drive (Optional)
- OR 1x 2.5" Internal Drive (Optional)
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| I/O Ports | - Standard System I/O
(Mouse, Keyboard, 2x USB Video, COM, LPT, LAN) | | | 200W Low Noise AC-DC power supply with PFC | AC Voltage | - 100 - 240V, 50-60Hz, 3-1.5 Amp Max
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| FAN | - Total of four 4-pin fan headers
- 4 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
| LED | - CPU / System Overheat LED
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
| | | Environmental Spec. | - Operating Temperature: 0°to 50°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |