 | |
 | | SYS-6014H-T | - SuperServer 6014H-T (Beige)
| | SYS-6014H-TB | - SuperServer 6014H-TB (Black)
| | | | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | | | | Memory Capacity | - Eight 184-pin DIMM sockets
- Supports up to 32GB DDR 266MHz or up to 16GB DDR 333MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR 333/266MHz buffered (registered) ECC SDRAM, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH/V + 82546GB
| | SATA | - ICH5R SATA 2-port Controller
- RAID 0, 1 support
| | SATA | - Marvell® 4-port SATA Controller
- RAID 0, 1, JBOD support
| | Zero-Channel RAID | - Supports RAID 0, 1, 5, 10, JBOD
- Support for Zero-Channel RAID with Supermicro All-In-One-ZCR Card: AOC-SOZCR1
- (Card not included)
| | IPMI | | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | PCI-Express / PCI-X | - 2 x Universal (SXB-E) slots
[ 2 (x8) PCI-Express Slots ] OR
[ 1x 64-bit PCI-X 133MHz slot and
1x 64-bit PCI-X 100MHz slot] | | | | | Serial ATA | - Up to Four SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 1x USB dual internal headers supporting up to 2 USB ports
- USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial ports / 1 header
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | - 2x USB & DB9 COM port tray
(Optional - in place of floppy drive) | | | |
| | Hot-swap | - 4x 3.5"SATA Hot-swap drive bays
| | | |
| | Floppy | - TEAC 3.5" 1.44MB Slim Floppy Drive
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | |
| | 1x 1U Serial ATA backplane | | | |
| | Fans | | | | |
| Cold-swappable 500W AC power supply module w/ PFC
[ 20-pin, (4-pin, 8-pin) = 12V ] | | AC Voltage | - 100 - 240V, 60-50Hz, 10 Amp
| | DC Output | | | +5V | | | +5V standby | | | +12V1 | | | +12V2 | | | +12V3 | | | -12V | | | +3.3V | | | | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, +3.3V Standby, & VBAT
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
| | FAN | - Total of five 3-pin fan headers
- Status monitor for speed control
| | Temperature | - Monitoring for CPU, chassis environment
- CPU Thermal Trip Support
- Thermal Monitor 2 (TM2) Support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
| | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - USB Keyboard Support
- Plug and Play (PnP)
- SMBIOS 2.3
- BIOS Rescue Hot Keys
- DMI 2.1
- Hardware BIOS Virus protection
- PCI 2.2
- ACPI 1.0
- Fan Speed Control
| |
