 |  | | SYS-6025C-URB | - SuperServer 6025C-URB (Black)
| | |  | | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | System Bus | - 1333 / 1066 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | |  | | Memory Capacity | - Six 240-pin DIMM slots
- Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
- Dual channel memory bus
- Memory must be populated in pairs
| | Memory Type | - 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | |  | | Chipset | - Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
| | SATA | - Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
| | Network Controllers | - Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 32 MB of video memory
| | Super I/O | | | Clock Generator | | | |  | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | USB | - 2 rear + 1 Type A connector + 2 headers (3 Ports)
- 6 total USB ports, 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
| | |  | | BIOS Type | - 16Mb SPI Flash with Phoenix ® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
| |  |  |  | | Form Factor | | | Model | | | |  | | Height | 3.5" (89mm) | | Width | 17.2" (437mm) | | Depth | 25.5" (648mm) | | Gross Weight | 55 lbs (24.9kg) | | Available Colors | Silver, Black | | |  | | Buttons | Power On/Off button System Reset button | | LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Power fail LED | | Ports | 2x USB Ports + DB9 COM Port (optional) | | | | Left Side | - 1 Universal I/O (UIO) Slot
- 3 (x8) PCI-E Slots (Full-height / Full-length)
| | |  | | Hot-swap | - 8x 3.5"SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
| | |  | | DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive | | Floppy | Slim 1.44MB Floppy Drive (Optional) | | |  | | 1x 2U SATA backplane | | |  | | Fans | | | Shroud | | | |  | | 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| | +5V standby | | | +12V | | | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | |  | | CPU | - Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
- CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend-state Indicator LED
- UID
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| | |  | | Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |