| | SYS-7047GR-TPRF-FM409 | - SuperServer 7047GR-TPRF-FM409 (Black)
| | | CPU | - Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 150W TDP) - Dual Socket R (LGA 2011)
| Note | † BIOS version 3.0 or above is required | Cache | | System Bus | | GPU | - supports M2090, up to 150W CPU at 30°C
| | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM)
| Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | GPU | - 4x NVIDIA Tesla M2090 Fermi GPU cards
| Chipset | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Renesas SH7757 BMC
| Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Video | | | | SATA | - 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 9x USB 2.0 ports total
(4x rear + 4x via header + 1x Type A) | Video | | Serial Port / Header | - 1x Fast UART 16550 port / 1 Header
| | | PCI-Express | - 4 PCI-E 3.0 x16 (double-width)
- 2 PCI-E 3.0 x8 (1 in x16 slot)
- 1 PCI-E 2.0 x4 (in x8)
| | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | | | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
| Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat & Power Fail LED
| Ports | | | | Hot-swap | - 8x 3.5" Hot-swap SAS/SATA Drive Trays
| Peripheral Bay(s) | - 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
| | | SAS / SATA Hard Drive Backplane with SES2 | | | Fans | - 4x 92x38mm 4-pin PWM Middle Cooling Fans
- 4x 80x38mm 4-pin PWM Rear Exhaust Fans
| | 1620W high-efficiency redundant power supply w/ PMBus | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
| DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
| Certification | Platinum Certified [ Test Report ] | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| FAN | - Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |