 | |
|
| |
| |
Top View
|
Air Shroud View
|
Rear View
 | Available Colors
| | |
Key Features
1. 760W Triple-Redundant Power Supply 2. 15 x Hot-swappable SAS
Drive Bays 3. 28-Port 3Gb/s SAS Expander with
Enclosure Management 4. 6x Full-height, Full-length expansion slot 5. 100% Cooling Redundancy 6. Power Switch & 5 LED Indicators 7. Can be configured as either HEAD
Or JBOD unit
| | | | Downloads | | | | |  | |
| | | | | |
 | | CSE-933E1-R760 | - SuperChassis 933E1-R760 (Beige)
| | CSE-933E1-R760B | - SuperChassis 933E1-R760B (Black)
| | | |
| 3U chassis support for motherboard size -
12" x 13" E-ATX and 12" x 10" ATX | | | |
| | Supports dual, single Intel® / AMD processors | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | 6x PCI expansion slots | | | |
| | Hot-swap | - 15x Hot-swap Drive Bays
- SAS or enterprise SATA HDD only recommended
| | | |
| 3U Expander Backplane, features:
• Scalability through cascading
• 3Gb support
• Inband SES-2 Enclosure Management
• SAS/SATA support
• Single input/output SFF 8087 connectors | | | |
| | Buttons | - Power On/Off button
- System Reset button
- Alarm Mute Switch
| | LEDs | - Power LED
- Network activity LED
- System Overheat LED
- Power Fail LED
| | Ports | - 2x Front USB Ports
- 1x RJ45 Port
| | | |
| | Fans | - 4x 9cm 3,500 RPM Hot-swap PWM Fans
- 2x Rear Exhaust PWM Fans
| | | | |
| | Chassis intrusion switch | | | | |
| | Operating Temperature Range | | | Non-Operating Temperature Range | - -40°C ~ 60°C (-40°F ~ 140°F)
| | Operating Relative Humidity Range | - 8% ~ 90% (non-condensing)
| | Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
| | |
| 760W Triple-Redundant AC to DC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V ] | | AC Voltage | - 100 - 240V, 50-60Hz, 14 - 8 Amp
| | DC Output | | | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | | |
| | Power Supply Safety / EMC | - USA - UL listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
| | | |
|  | | | | | | |
| | | Part Number | Qty | Description | | SC933E1-R760 Chassis | CSE-933E1-R760(B) | 1 | 3U Chassis (B = Black) | | Cables | CBL-0108L-02 | 1 | 39cm iPass to iPass SAS Cable | | Fan(s) | FAN-0062L4
FAN-0064L4 | 2
4 | 8cm Rear Exhaust PWMFan
9cm Hot-swap PWM Cooling Fan | | Hard Drive | CSE-PT39(B)
BPN-SAS-933EL1 | 15
1 | Hot-swap drive tray (B = Black)
SC933 Backplane with LSI SASX28 Expander Chip | | Mounting Rails | CSE-PT50L | 1 | 3U Chassis Mounting Rails; 31.1" - 32.6" | | Power | PWS-0050M
CSE-PT933-PD382 | 3
1 | 380W Power Modules for 760W Triple-Redundant Power Supply
Power Distributor | | Air Shroud | MCP-310-38002-0N
CSE-PT45 | 1
1 | SC933 Intel DP X8.X7 PC air shroud 12" x 13" [ Manual ]
Air Shroud | | Backplane | BPN-SAS-933EL1 | 1 | 3U SAS / SATA Expander Backplane with single LSI SASX28 Expander Chip | | | | | |
| | | Part Number | Qty | Description | | Heatsink / Retention | - | - | Please refer to our Thermal Components Matrix | | Control Board | CSE-PTJBOD-CB1 | - | JBOD Storage Power-up Control Board | | Cable(s) | CBL-0167L
CBL-0168L
CBL-0108L-02 | -
-
- | SAS 933EL1 BP 1-Port Internal Cascading Cable
SAS 933EL2 BP 2-Port Internal Cascading Cable
SFF 8087 to SFF 8087 Internal Backplane Cable | | JBOD Kit - Used for cascading purposes | CSE-PTJBOD-CB2
CBL-0166L
CBL-0102L
CBL-0351L
CBL-0352L
MCP-260-00011-0N | -
-
-
-
- | Power Control Card for JBOD
SAS BP External Cascading Cable
I2C CABLE FOR SATA LED, 51CM, LF
Full Height Bracket. 85CM 1-PORT EXT IPASS TO INT IPASS
85CM 2-PORT ETX IPASS TO INT IPASS FH
I/O shield without any opening | | RAID cards | AOC-USAS2-H4iR
AOC-USAS2LP-H8iR
AOC-USAS2-S4i
AOC-USAS2-S4iR | -
-
-
- | 4 int/4 ext ports, supports 240 HDDs
8 int ports, supports 240 HDDs
4 int/4 ext ports, supports 122 HDDs
4 int/4 ext ports, supports 122 HDDs | | HBA cards | AOC-USAS2-L8i
AOC-USAS2-L4i
AOC-USAS2-L8i | -
-
- | 8 int ports, supports 122 HDDs
4 int/4 ext ports, supports 63 HDDs
8 int ports, supports 122 HDDs | | Adaptor HDD carrier | MCP-220-00043-0N | - | Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray | | | |
|
| |
