SuperChassis 846XA-R1K28B

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Chassis   4U   [ SC846XA-R1K28B ]



Alternate View


 
0Rear View
Available Colors

  Black   
Key Features
• Support two 1000W BBP
• Support up to 13 FH FL expansion slots
• High Availability PS, Storage Capacity,
   and numerous I/O slots
1. High density 4U Storage Chassis
2. 1280W Redundant Power Supplies
    Platinum Level (95%)
3. 24x 3.5" Hot-swap SAS2/SATA3 Drive
    Bays w/ Direct Attached HDD
    backplane; Optional 2x 2.5" Hot-swap
    SATA drive bay (MCP-220-82609-0N)
4. 100% Cooling Redundancy
5. Battery Backup Power (optional:
    PWS-1K03B)
6. Can be configured as either HEAD
    Or JBOD unit

Downloads
Chassis
Manual
Download Manual
Product SKUs
CSE-846XA-R1K28B
  • SuperChassis 846XA-R1K28B (Black)
 
Form Factor
4U chassis support for motherboards up to size
15.2” x 13.2", E-ATX and ATX
 
Processor Support
Supports dual, single Intel® / AMD processors
 
Dimensions
Height
  • 7" (178mm)
Width
  • 17.2" (437mm)
Depth
  • 29" (736.6mm)
Gross Weight
  • 75 lbs (34.0kg)
Available Colors
  • Black
 
Expansion Slots
Up to13x Full-height, Full-length expansion slots
 
Drive Bays
Hot-swap
  • 24x 3.5" Hot-swap SAS Drive Bays w/ SES2 (dual-channel)
  • SAS or enterprise SATA HDD only recommended
Optional
  • 2x 2.5" Hot-swap SAS/SATA Drive Bays on rear side of Chassis
  • 2x Fixed 3.5" Internal Hard Drive, OR
  • 6x Fixed 2.5" Internal Hard Drive
 
Backplane
4U Direct attached Backplane, features:
• SAS2 compliance
• Scalability through cascading
• 6Gb support
• Inband SES-2 Enclosure Management
• SAS/SATA support
• Dual input/output SFF 8087 connectors
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Motherboard (for CSE-846XA-R1K23B)
X10DRX X11DPX-T
System Cooling
Fans
  • 4x 92mm hot-swap cooling fans
  • 1x 80mm exhaust and air shroud
 
System Monitoring
Chassis intrusion switch
 
Operating Environment (System)
Operating Temperature Range
  • 5°C ~ 35°C (41°F ~ 95°F)
Non-Operating Temperature Range
  • -40°C ~ 60°C (-40°F ~ 140°F)
Operating Relative Humidity Range
  • 8% ~ 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
 
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 8-12A, 50-60Hz
  • 1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+
  Platinum Certified
  [ Test Report ]
 
Regulatory (Power Supply)
Power Supply Safety / EMC
  • USA - UL listed, FCC
  • Canada - CUL listed
  • Germany - TUV Certified
  • Europe/CE Mark
  • EN 60950/IEC 60950-Compliant
  • CCC
See Parts List

Standard Parts List
  Part Number Qty Description
Chassis CSE-846XA-R1K28B 1 4U Chassis (Black)
Backplane BPN-SAS-846A 1 24-port 4U SAS 6Gbps direct-attached backplane, support up to 24x 3.5-inch SAS2/SATA3 HDD/SSD
Power Supply PWS-1K23A-1R 2 AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 336x76x40 mm,HF,RoHS/REACH
Power Distributor PDB-PT418-B6824 1 Power Distributor Board for SC418 to support Battery and GPU option
Rear Window MCP-240-84603-0N 1 846X rear window
Air Shroud MCP-310-84602-0N 1 Air shroud for SC846X (Optimized for X9DRX)
Air Shroud MCP-310-84602-0N 1 Air shroud for SC846X (Optimized for X9DRX)
Air Shroud MCP-310-84602-0N 1 Air shroud for SC846X (Optimized for X9DRX)
Air Shroud MCP-310-84602-0N 1 Air shroud for SC846X (Optimized for X9DRX)
Cable 1 CBL-0217L 1 16PIN CNTL PANEL CONVERTER CBL FOR SC826,PBF
Cable 2 CBL-0071L 1 ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF
Cable 3 CBL-0088L 4 10.5" 4PIN FAN POWER CORD FOR 743X-645,PBF
Cable 4 CBL-0216L 1 4 TO 4 PIN FAN POWER CABLE, 210MM
Cable 5 CBL-0088L 4 10.5" 4PIN FAN POWER CORD FOR 743X-645,PBF
Cable 6 CBL-0216L 1 4 TO 4 PIN FAN POWER CABLE, 210MM
Cable 7 CBL-0217L 1 16PIN CNTL PANEL CONVERTER CBL FOR SC826,PBF
Cable 8 CBL-0071L 1 ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF
Cable 9 CBL-0174L 2 14AWG USA POWER CORD 6FT PB FREE
Cable 10 CBL-0174L 2 14AWG USA POWER CORD 6FT PB FREE
Cable 11 CBL-0088L 4 10.5" 4PIN FAN POWER CORD FOR 743X-645,PBF
Cable 12 CBL-0217L 1 16PIN CNTL PANEL CONVERTER CBL FOR SC826,PBF
Cable 13 CBL-0088L 4 10.5" 4PIN FAN POWER CORD FOR 743X-645,PBF
Cable 14 CBL-0174L 2 14AWG USA POWER CORD 6FT PB FREE
Cable 15 CBL-0216L 1 4 TO 4 PIN FAN POWER CABLE, 210MM
Cable 16 CBL-0217L 1 16PIN CNTL PANEL CONVERTER CBL FOR SC826,PBF
Cable 17 CBL-0216L 1 4 TO 4 PIN FAN POWER CABLE, 210MM
Cable 18 CBL-0071L 1 ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF
Cable 19 CBL-0174L 2 14AWG USA POWER CORD 6FT PB FREE
Cable 20 CBL-0071L 1 ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF
Fan 1 FAN-0125L4 1 80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
Fan 2 FAN-0115L4 4 92x92x38 mm, 7.5K RPM, PWM Fan for SC748 rev K
Fan 3 FAN-0125L4 1 80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
Fan 4 FAN-0115L4 4 92x92x38 mm, 7.5K RPM, PWM Fan for SC748 rev K
Fan 5 FAN-0125L4 1 80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
Fan 6 FAN-0125L4 1 80x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ Housing
Fan 7 FAN-0115L4 4 92x92x38 mm, 7.5K RPM, PWM Fan for SC748 rev K
Fan 8 FAN-0115L4 4 92x92x38 mm, 7.5K RPM, PWM Fan for SC748 rev K
Fan 9 MCP-340-00036-0N 1 80x80x32 mm, 6.7K RPM, 4-pin PWM Bare Fan
Front Panel MCP-280-82601-0N 1 Front control board adapter (TB826) for SC216,826,936,846
Front Panel MCP-280-82601-0N 1 Front control board adapter (TB826) for SC216,826,936,846
Front Panel MCP-280-82601-0N 1 Front control board adapter (TB826) for SC216,826,936,846
Front Panel MCP-280-82601-0N 1 Front control board adapter (TB826) for SC216,826,936,846
Fan Holder MCP-320-00035-0N 1 SC836 Rear Exhaust Fan Connector Latch
Fan Holder MCP-320-00034-0N 1 SC836 Rear Exhaust Fan Housing
Drive Tray(s) MCP-220-00075-0B 24 Black gen 5.5 hot-swap 3.5" HDD tray
Drive Tray(s) MCP-220-00075-0B 24 Black gen 5.5 hot-swap 3.5" HDD tray
Drive Tray(s) MCP-290-82607-0N 1 826B/216B rear dummy cover for 2 X 2.5
Drive Tray(s) MCP-290-82607-0N 1 826B/216B rear dummy cover for 2 X 2.5
Drive Tray(s) MCP-290-82607-0N 1 826B/216B rear dummy cover for 2 X 2.5
Drive Tray(s) MCP-220-00075-0B 24 Black gen 5.5 hot-swap 3.5" HDD tray
Drive Tray(s) MCP-290-82607-0N 1 826B/216B rear dummy cover for 2 X 2.5
Drive Tray(s) MCP-220-00075-0B 24 Black gen 5.5 hot-swap 3.5" HDD tray
Mounting Rails MCP-290-00057-0N 1 set Rail set, quick/quick, default for 4U 17.2" W
Mounting Rails MCP-290-00060-0N 1 Threaded rail adapter default for round hole rack
Mounting Rails MCP-290-00060-0N 1 Threaded rail adapter default for round hole rack
Mounting Rails MCP-290-00057-0N 1 set Rail set, quick/quick, default for 4U 17.2" W
Mounting Rails MCP-290-00057-0N 1 set Rail set, quick/quick, default for 4U 17.2" W
Mounting Rails MCP-290-00057-0N 1 set Rail set, quick/quick, default for 4U 17.2" W
Mounting Rails MCP-290-00060-0N 1 Threaded rail adapter default for round hole rack
Mounting Rails MCP-290-00060-0N 1 Threaded rail adapter default for round hole rack
Mounting Rails MCP-290-00115-0N 1 Inner rail, quick-release type
Mounting Rails MCP-290-00117-0N 1 Outer rail, quick-release type
BBP P/N PWS-1K28P-SQ 2 Power Supply
Drive tray MCP-290-84608-0N 1 Dual HDD opening dummy cover for 846B chassis
Optional Parts List
  Part Number Qty Description
Cable(s) CBL-0167L
CBL-0168L
CBL-0084L
-
-
-
SAS 846EL1 BP 1-Port Internal Cascading Cable
SAS 846EL2 BP 2-Port Internal Cascading Cable
Front control cable split converter 6"
Cable(s) CBL-0108L-02
CBL-0281L
-
-
SFF 8087 to SFF 8087 Internal Backplane Cable, 39cm
SFF 8087 to SFF 8087 Internal Backplane Cable, 75cm
Cable(s) CBL-0143L
CBL-0082L
CBL-0231L
-
-
-
1x 4pin to 1x SATA S-RA SATA power extension
1x 4pin to 2x SATA S-RA SATA power extension
70cm round S-RA SATA cable
BBP P/N PWS-1K03B-1R - Power Supply
Drive Trays MCP-220-82609-0N
MCP-220-00043-0N
MCP-120-00035-0N
-
-
Rear 2.5" Hot-swappable HDD kit
3.5" convert to 2.5" hot-swap HDD Tray
Retention bracket kit for CF card reader
Heatsink / Retention - - Please refer to our Thermal Components Matrix
Front Bezel
( Compatibility Table )
MCP-210-84601-0B -
Front Bezel Cover, Black with Key Lock
JBOD Kit - Used for cascading purposes CSE-PTJBOD-CB2
CBL-0166L
CBL-0102L
CBL-0352L
MCP-260-00011-0N
-
-
-
-
Power Control Card for JBOD
SAS BP External Cascading Cable
I2C CABLE FOR SATA LED, 51CM, LF
85CM 2-PORT EXT IPASS TO INT IPASS
I/O shield without any opening
RAID cards AOC-USAS2-H4iR
AOC-USAS2LP-H8iR
AOC-USAS2-S4i
AOC-USAS2-S4iR
-
-
-
-
4 int/4 ext ports, supports 240 HDDs
8 int ports, supports 240 HDDs
4 int/4 ext ports, supports 122 HDDs
4 int/4 ext ports, supports 122 HDDs
HBA cards AOC-USAS2-L8i
AOC-USAS2-L4i
AOC-USAS2-L8i
-
-
-
8 int ports, supports 122 HDDs
4 int/4 ext ports, supports 63 HDDs
8 int ports, supports 122 HDDs
LCD/OLED Solutions - - Please reference the LCD/OLED Display Solutions for details
Hide Parts List

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.