 |
|
 |
| MBD-C2SBC-Q
-O |
- C2SBC-Q
(Standard Retail Pack)
|
| MBD-C2SBC-Q
-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 12" x 9.6 ", (30.5cm x 24.4cm)
|
| |
|
| CPU |
- Single LGA775 Socket
-
Supports Intel® Core™2 Extreme QX9000/QX6000 series
-
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
-
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
-
Supports Intel® Pentium® E5000/E2000 series
-
Supports Intel® Celeron® E1000 and 400 series
|
| System Bus |
- 1333 / 1066 / 800 MHz system bus
|
| |
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
|
| Memory Type |
- DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
| Memory Voltage |
|
| |
|
| Chipset |
|
| Serial ATA |
- Intel® ICH9DO SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers |
- 1 x Intel® 82566DM & Intel® 82573L Dual Port Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
|
| Audio |
- Realtek ALC883 High Definition 5.1 Channel Audio
|
| Video |
|
| Super I/O |
- 2x Winbond 83627DHG chips
|
| Clock Generator |
|
| |
|
| Serial ATA |
- Six Serial ATA ports ( 3Gbps performance)
- Six SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| LAN |
|
| USB |
- 12x USB 2.0 / 1.1 compatible (6x rear ports + 2x on-board + 2x headers)
|
| Audio |
- Realtek ALC883 High Definition 5.1 Channel Audio
- Line-in / Line-out / Microphone Ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 3x Serial Header
|
| Parallel Port |
|
|
|
|
|
| Mid-Tower |
|
| Important Note |
- To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
|
| |
|
| PCI-Express |
- 1 (x16) PCI-e slot
- 1 (x4)(using x8) PCI-e slot
|
| PCI |
- 5x 32-bit 33MHz PCI (5V) slots
|
| |
|
| BIOS Type |
- 16Mb SPI Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| Software |
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
- Suspend to RAM (STR)
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
|
| FAN |
- Total of three 4-pin fan headers
- 3 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
|
| Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
|
| |
|
|
| Environmental Spec. |
- Operating Temperature: 0° to 55°C
- Non-operating Temperature: -40° to 85°C
- Operating Relative Humidity: 15% to 95% (non-condensing)
- Non-operating Relative Humidity: 15 to 90% (non-condensing)
|
|
