| | MBD-PDSLM-B | | | | Form Factor | | Dimensions | - 6.7" x6.7" (170 mm x 170 mm)
| | | CPU | - Single mPGA478 ZIF Socket
- Supports Intel® Core™ 2 Duo mobile / Core™ Duo / Celeron® M processors
- Hyper-Threading (HT) capable
| System Bus | | | | Memory Capacity | - Supports up to 4 GB of unbuffered, non-ECC DDR2 667/533MHz memory ( Dual Channel)
| Memory Type | - DDR2 667/533 MHz unbuffered, non-ECC SODIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2 GB
| Memory Voltage | | | | Chipset | - Intel 945GME
- ICH7M + Intel® 82573L
| Serial ATA | - Intel® ICH7M SATA (3 Gbps) controller built-in
| Network Controllers | - Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| Audio | | Super I/O | | | | Serial ATA | - Two Serial ATA ports ( 3Gbps performance)
- Two SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| LAN | | USB | - 4x USB 2.0 compliant (2x ports + 1x header)
| Audio | - 1x Line In / Line Out / Microphone ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | | | PCI | - 1x 32-bit 33MHz PCI (5V) slots
| | | BIOS Type | - 4Mb Flash EEPROM with AMI BIOS®
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
| | | Software | | Power Configurations | - ACPI/APM Power Management
- Power-on mode control for AC power recovery
| | | Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, VBAT.
| FAN | - Total of two 4-pin fan headers
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
| LED | - CPU Overheat LED
- +5V standby alert LED
| | | Environmental Spec. | - Operating Temperature: 0° to 55°C
- Non-operating Temperature: -40° to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |