 |
 |
Form Factor |
 |
ATX |
 |
Dimensions |
 |
12" x 8.7", (30.5cm x 22.1cm) |
 |
 |
 |
CPU |
 |
Single FCPGA370 ZIF Sockets Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz Supports an Intel® Celeron® processor (FCPGA2) with 256KB of integrated Advanced Transfer Cache up to 1.2GHz |
 |
System Bus |
 |
133/100/66MHz system bus |
 |
 |
 |
Memory Capacity |
 |
Three 168-pin DIMM 25° sockets Supports up to 512 MB of PC133/100 memory |
 |
Memory Type |
 |
PC133/100 72-bit unbuffered SDRAM, 168-pin gold-plated DIMMs |
 |
DIMM Sizes |
 |
64 MB, 128 MB, 256 MB, 512 MB |
 |
Memory Voltage |
 |
3.3 V only |
 |
 |
 |
Chipset |
 |
Intel® 815E Chipset GMCH + ICH2 + FWH |
 |
Network Controllers |
 |
2x Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, RJ45 output |
 |
 |
 |
AGP |
 |
4x AGP slot Direct AGP with optional AIMM 4MB Display Cache
|
 |
PCI Expansion |
 |
4x 32-bit 33MHz PCI (5V) slots
|
 |
IDE |
 |
Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
 |
USB |
 |
Up to 4 USB ports |
 |
Infrared |
 |
1 Infrared port header |
 |
Serial Ports |
 |
2 Fast UART 16550 serial ports |
 |
Parallel Port |
 |
1 ECP / EEP Parallel Port |
 |
Floppy |
 |
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
 |
Keyboard / Mouse |
 |
PS/2 keyboard and mouse ports |
 |
|
 |
 |
 |
1U Chassis |
 |
SC811 |
 |
2U Chassis |
 |
SC822 |
 |
Important Note |
 |
To ensure system stability, a 250W (minimum) ATX power supply [20-pin] is required. |
 |
 |
 |
BIOS Type |
 |
4Mb Flash EEPROM with AMI® BIOS |
 |
BIOS Features |
 |
Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support |
 |
 |
 |
Software |
 |
SuperDoctor® III Watch Dog |
 |
Power Configurations |
 |
ACPI/APM Power Management Real Time Clock Wake-up Alarm Main Switch Override Mechanism Wake-On-LAN (WOL) header Power-on mode control for AC power loss recovery Internal/External modem remote ring-on |
 |
 |
 |
Voltage |
 |
Monitors for CPU Cores, +3.3V, +5, ±12V CPU Core auto-switching voltage regulator with auto-sense from 1.3V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) |
 |
FAN |
 |
Total of four 3-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware/software on/off control |
 |
Temperature |
 |
Monitoring for CPU, chassis, environment |
 |
LED |
 |
CPU Overheat LED System Overheat LED Suspend-state indicator LED |
 |
Other Features |
 |
Chassis intrusion detection Chassis intrusion header |
 |
|