 |
 |
| Form Factor |
|
ATX |
 |
| Dimensions |
|
12" x 9.5", (30.5cm x 24.1cm) |
|
|
|
| CPU |
|
• Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.4GHz
• Hyper-threading enabled |
|
| System Bus |
|
800 / 533 / 400MHz system bus |
|
|
|
| Memory Capacity |
|
• Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs |
|
| Memory Type |
|
DDR400/333/266 (ECC or non-ECC) unbuffered SDRAM, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
256 MB, 512 MB, 1 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
• Intel® E7210 (Canterwood ES) chipset
• MCH + 6300ESB + FWH + ISA Bridge |
|
| Serial ATA |
|
• SATA Controller on-chip (Intel® ICH5R)
• Dual Serial ATA ports
• RAID 0, 1 Supported * |
|
| Network Controllers |
|
• Single Intel® 82541 Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
|
|
| PCI Expansion |
|
• 4x 32-bit 33MHz PCI (5V) slots
|
|
| ISA Expansion |
|
• 3x 16-bit ISA slots (1 shared with PCI slot)
|
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
|
| USB |
|
Up to 8 USB ports |
|
| Infrared |
|
1 Infrared port header |
|
| Serial Ports |
|
2 Fast UART 16550 serial ports |
|
| Parallel Port |
|
1 ECP / EEP Parallel Port |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
* - Driver Support for Windows 2000, XP, and 2003 only
|
|
|
|
| Rackmount Tower / 4U |
|
• SC742i-300 |
|
| Important Note |
|
To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with AwardBIOS® |
|
| BIOS Features |
|
• Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support |
|
|
|
| Software |
|
• SuperDoctor® III
• Watch Dog |
|
| Power Configurations |
|
• ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Suspend to RAM (STR)
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on |
|
|
|
| Voltage |
|
• Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
• Total of four 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header |
|
|
