X9DBS-F (OEM Only)

Super Micro Computer, Inc.
Contact Us



  Products   Motherboards   Xeon® Boards   [ X9DBS-F ]

Supermicro motherboard X9DBS-F

For server only

Key Features
1. Dual socket B2 (LGA 1356) supports
    Intel® Xeon® processor E5-2400 v2
2. Intel® C602J chipset
3. Up to 384GB DDR3 1600MHz LRDIMM
    / 192GB RDIMM; 6x DIMM slots
    and support for NV-DIMM Modules
4. Expansion slots:
    1 PCI-E 3.0 x24 Left riser slot,
    1 PCI-E 3.0 x8 for SMCI AOM
5. Intel® i350-AM2 dual port GbE LAN
6. 2x SATA3 (6Gbps) and 8x external
    HD mini-SAS ports
7. Integrated IPMI 2.0 with shared LAN
8. 3x USB 2.0 ports
    (2 rear + 1 Type A)
9. TPM onboard Header
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
  • X9DBS-F (For Server Only)
Physical Stats
  • 16.72" x 8.1" (42.47cm x 20.57cm)
  • Intel® Xeon® processor E5-2400   and E5-2400 v2 (up to 95W TDP **)
  • Dual Socket B2 (LGA 1356)
  • Up to 25MB
System Bus
  • QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity
  • 6x 240-pin DDR3 DIMM slots
  • Up to 384GB DDR3 ECC LRDIMM
  • Up to 192GB DDR3 ECC Registered memory (RDIMM)
  • Up to 48GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
  • Supports NV-DIMM Modules**

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
  • Intel® C602J chipset
  • SATA3 (6Gbps)
  • 8x external HD mini-SAS ports (from AOM)
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350-AM2 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
  • Matrox G200eW
Input / Output
  • 2x SATA3 (6Gbps) ports
  • 8x SAS2 (3Gbps) ports
  • 2x RJ45 LAN ports
  • 3x USB 2.0 ports total
    (2 rear + 1 Type A)
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 serial (1 header)
  • 1x TPM Header
Chassis ( Optimized for X9DBS-F )
2U Chassis
  • CSE-927ETS
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Expansion Slots
  • 1x PCI-E 3.0 x24 (left riser slot)
  • 1x PCI-E 3.0 x8 (for SMCI AOC)

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
System BIOS
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
  • Six 4-pin fan headers with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • RoHS
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List
  Part Number Qty Description
X9DBS-F MBD-X9DBS-F 1 X9DBS-F Motherboard
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
- TPM module with Infineon 9655, RoHS/REACH,PBF;
Vertical or Horizontal depends on the server
SuperDOM - - Supermicro SATA DOM Solutions [Details]

Note: X9DBS-F is for server SKU (SSG-6037B-DE2R16L) only, please contact Supermicro sales for more details.

** Note: Only select NV-DIMM modules are currently supported, check with your sales representitive. This technology requires additional 3rd party software for proper operation.

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.