X9DRFF-7T+

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Motherboards   Xeon® Boards   [ X9DRFF-7T+ ]

Supermicro motherboard X9DRFF-7T+
Key Features
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz;
    16x DIMM slots
4. Expansion slots: 1 PCI-E 2.0 x4 (in x8)
    1 PCI-E x16, 2 PCI-E x8
    Riser card support: PCI-E 3.0 x32 (rear)
5. Intel® X540 Dual port 10GBase-T
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS2 (6Gb/s) ports via Broadcom 2208
8. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
9. 3x USB 2.0 ports (2 rear, 1 Type A)
   
 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DRFF-7T+ -B
  • X9DRFF-7T+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 8.54" x 18.72" (21.7cm x 47.5cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 130W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
     SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS2 from Broadcom 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 8 devices as default, more HDD devices support is also available as an option *

    * For special sku, please contact your Supermicro Sales.
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® X540 Dual Port 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Video
  • Matrox G200eW
 
Input / Output
AHCI SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 3 USB 2.0 ports (2 rear + 1 Type A)
Video
  • 1 VGA port
Serial Port / Header
  • 1 Fast UART 16550 port
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM Header
Chassis (Optimized for X9DRFF-7T+ )
1U Chassis
  • CSE-816LT-655B
Tower / 4U Rackmount
  • CSE-F414IS-R1K62BP
  • CSE-F424AL-R1K28BP
  • CSE-F424BF-R1K28BP
Important Chassis Notes
  • This motherboard is designed only for FatTwin™ chassis
SuperServer(s) with X9DRFF-7T+
Model(s)
  • SYS-F617H6-FTPT+

 
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16 slot
  • 2 PCI-E 3.0 x8 slots
  • 1 PCI-E 2.0 x4 (in x8) slot
  • Riser card support: PCI-E 3.0 x32 (rear)

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Suspend Static indicator LED
  • UID/Remote UID
Other Features
  • RoHS
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (bulk)
  Part Number Qty Description
Motherboard MBD-X9DRFF-7T+ 1 X9DRFF-7T+ Motherboard (only comes with server)
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference


Note:  X9DRFF-7T+ is for server SKUs (FatTwin™) only, please contact Supermicro sales for more details.

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.